Volver al blog
Artículo

Principle of Roof Cooling for Container Houses

Admin 15 de septiembre de 2026

The roof cooling of container houses is mainly achieved through principles such as blocking heat transfer, reflecting solar radiation, promoting air convection, or evaporative heat dissipation. Common forms include solid material insulation, ventilation insulation, reflective cooling, and evaporative cooling.

Solid Material Insulation

This method utilizes the heat storage capacity, thermal stability, and low thermal conductivity of materials to delay the speed of heat transfer from the roof to the interior. For example, residential container houses use an outer layer of anti-corrosion color-coated steel plates to reflect sunlight, a middle layer of over 50mm polyurethane foam to block heat conduction, and an inner layer of fire-resistant gypsum boards to assist in humidity control and temperature stabilization, reducing heat transfer through the low thermal conductivity of the materials themselves.

Ventilation Insulation

By setting up elevated ventilation layers or ventilation spaces within the ceiling, air movement is utilized to carry away heat. There are two specific forms:

  1. Elevated Ventilation Insulation Layer: Elevated bricks, concrete slabs, etc., are laid on the roof structure to form an air interlayer. As the air heats up, it rises and forms a convection with the external cold air, carrying away the accumulated heat and lowering the temperature of the lower roof.
  2. Ceiling Ventilation Insulation Layer: The space between the roof and the indoor ceiling is used to form a ventilation channel, combined with ventilation openings at the eaves and ridge, to reduce heat transfer through active or passive ventilation.

Reflective Cooling

Light-colored coatings or high-reflectivity materials (such as aluminum foil reflective layers) are used on the roof surface to reduce solar radiation absorption. For example, reflective heat-insulating coatings use a silver-white coating to reflect most of the infrared radiation, lowering the roof temperature and reducing heat transfer to the interior. Actual measurements show that such solutions can reduce the roof surface temperature by more than ten degrees Celsius and lower the indoor temperature by 3 to 5 degrees Celsius.

Evaporative Cooling

The principle of water evaporation to absorb heat is utilized to lower the roof temperature. Common forms include:

  1. Roof Sprinkling: Fine water mist is generated through micro-spray belts, covering evenly and evaporating quickly to carry away a large amount of heat. For example, after sprinkling water on a color-coated steel roof, the indoor temperature can be lowered by 3 to 5 degrees Celsius with low water consumption.
  2. Water-Storing Roof: Water is stored on the roof, utilizing its large heat capacity to absorb solar radiation heat and slow down the temperature rise.
  3. Green Roof: Through plant transpiration and the heat absorption of the planting soil insulation layer, along with vegetation blocking sunlight, the roof temperature is comprehensively lowered.