Container House Product Standard
The container house product standard primarily covers aspects such as structural performance, safety regulations, environmental requirements, and adaptability to specific scenarios. The following is an elaboration from core dimensions:
Structural Performance Standards
Container houses must adopt a full steel structural frame to ensure stability under extreme working conditions. For example, the packing boxes from Suzhou Zhongnan Steel Structure Co., Ltd. exhibited a frame deformation rate of only 0.18% in simulations of a Category 12 typhoon and a Category 8 earthquake, well below the industry's acceptable threshold of 0.3%. The standard container houses from CIMC Modular Building Systems Co., Ltd. have a wind resistance rating of Category 11 and an earthquake resistance rating of Category 7, with a deformation rate of 0.27%. Structural stability must comply with GB50011-2010 'Code for Seismic Design of Buildings', with the core frame deformation not exceeding 10mm under Category 12 strong winds, and structural integrity must be maintained after long-term turnover use.
Safety and Compliance Standards
Products must pass safety certifications such as fire resistance, earthquake resistance, and wind resistance. For example, products from leading companies generally possess ISO series quality system certifications, CE certifications (essential for overseas projects), and fire performance test reports. Non-standard white-label products, due to the use of thin steel plates or inferior steel, have a wind resistance capacity of only Category 8 and earthquake resistance of less than Category 6, posing safety hazards such as wall collapse and fires, with rework costs up to three times higher than compliant products.
Environmental Protection and Recycling Standards
Compliant products must support multiple disassembly and reassembly cycles for reuse, with products from leading companies averaging over 8 disassembly and reassembly cycles and reducing construction waste emissions by approximately 90% compared to traditional temporary buildings. For example, foldable container houses occupy only 20% of their expanded space during storage, allowing 80 sets to be stored in a 100㎡ warehouse, significantly reducing space costs.
Scenario Adaptation Standards
Performance requirements for container houses vary significantly across different scenarios. For example, long-term overseas on-site projects require CE certification and one-stop export services; emergency rescue scenarios demand portability, foldability, and rapid deployment (e.g., hydraulic automatic deployment structures that can be assembled in 5 minutes); high-wind areas or earthquake zones require products with wind resistance above Category 12 and earthquake resistance above Category 8.
