Volver al blog
Artículo

Container House Partition Disassembly Diagram

Admin 15 de septiembre de 2026

Currently, there is no detailed diagram directly targeting the disassembly of container house partitions, but the disassembly logic can be inferred based on relevant structural descriptions and installation processes. The following analysis is conducted from three aspects: structural composition, disassembly steps, and precautions.

1. Structural Composition and Disassembly Logic
The partitions of container houses are typically composed of components such as corner aluminum, wall panels, door frame channel aluminum, and top corner aluminum. Taking a packing-box-type house as an example, during installation, corner aluminum is first single-sided fixed to the frame using rivets, followed by the sequential installation of the entire wall panel, door side panel, door head panel, and door frame channel aluminum, and finally, the top corner aluminum on the other side is fixed. Disassembly requires reverse operations: first, remove the top corner aluminum on the other side, take down the door frame channel aluminum and door side panel, then separate the entire wall panel, and finally, remove the initially fixed corner aluminum. During this process, it is necessary to retain the rivet holes for subsequent restoration or adjustment.

2. Key Component Disassembly Points

  • Corner Aluminum and Wall Panel Connection: As the core component for fixing the wall panel, corner aluminum requires professional tools to loosen the rivets during disassembly to avoid violent disassembly causing frame deformation.
  • Door Frame Channel Aluminum Separation: The channel aluminum at the door frame is usually fixed to the wall panel with bolts or clips. First, remove the bolts or unclip the clips, then gently lift the channel aluminum to detach it from the wall panel.
  • Top Corner Aluminum Handling: After being fixed, the top corner aluminum may deform due to long-term load-bearing. During disassembly, check its integrity, and if there is bending, correct it before reuse.

3. Disassembly Precautions

  • Safety Protection: Before disassembly, clear the items inside the partition, wear protective gloves and goggles to prevent metal debris from scratching.
  • Component Marking: Number and mark the disassembled corner aluminum, wall panels, and other components to avoid misinstallation during restoration.
  • Structural Inspection: After disassembly, inspect the load-bearing capacity of the container frame. If deformation of the galvanized pipe main frame or damage to the insulation sandwich panel is found, repair or replace it in a timely manner.

4. Supplementary Information for Disassembly in Special Scenarios
If the container house adopts a hydraulic deck or a deformable structure (such as the side deck that unfolds via an electric hydraulic system in the case), during disassembly, first turn off the hydraulic device, retract the deck, and then proceed with partition disassembly. Such structures usually involve more mechanical components, and it is recommended that professional personnel operate to avoid damaging the hydraulic system.