What is the Thickness of Container House Panels

The thickness of panels in different parts of container houses varies, with a common thickness range of 0.8mm - 3.0mm. Details are as follows:

Container aluminum veneer: As a building decoration material, the aluminum panel thickness of container aluminum veneer for building movable houses comes in several specifications, including 2.0mm, 2.5mm, and 3.0mm. This type of aluminum veneer is made from aluminum alloy sheets as raw materials, processed and formed through processes such as plate cutting, bending, and welding. Its surface is coated with fluorocarbon paint using a fully automatic spraying device, resulting in a smooth and flat panel surface, good gloss, high hardness, and resistance to surface scratches. It is suitable for the interior and exterior wall decoration of various buildings.

Container roof panel: There are multiple thickness specifications. A custom-made container roof panel with dimensions of 12002920/2370mm can have a thickness customizable between 1.0mm and 2.0mm. Among them, the roof panel with dimensions of 12002370 is suitable for 20-foot and 40-foot standard containers, while the one with dimensions of 1200*2920 is suitable for containers with a width of 3 meters. Additionally, the roof panel thickness of dry cargo containers commonly used internationally is generally 2.0mm.

Container side panel: The side panels near the front and rear end frames are mostly 2mm thick, while the remaining side panels are generally 1.6mm thick.

Other panels of container: The front end panels and door panels are usually 2mm thick. The outer layer of the general wall is made of container corrugated panels, which are roll-formed from weather-resistant steel plates or galvanized steel plates with a thickness between 1.2mm and 3.0mm. The newly custom-made container corrugated panels by Cangzhou Xinhe have a thickness between 0.8mm and 2.0mm.