Stickers Inside Container Houses

When applying wallpaper or using container stickers inside container houses, appropriate methods should be adopted and relevant precautions should be taken according to different purposes.

The method of applying wallpaper is similar to that in traditional houses, and the specific steps are as follows:

1. Preparation: The walls of container houses may be uneven. Ensure that the walls are clean, flat, and smooth. If there are obvious depressions or cracks on the walls, use a filler to repair them. At the same time, remove dust, oil stains, or residues on the walls to create a good foundation for subsequent wallpaper application.
2. Measurement and cutting: Use a tape measure to accurately measure the dimensions of the walls and mark the corresponding dimensions on the wallpaper. Then, use scissors or a cutting knife to cut the wallpaper to an appropriate size. Leave extra edges for easy subsequent adjustments.
3. Prepare the adhesive: Prepare the appropriate wallpaper adhesive according to the material requirements of the wallpaper. Follow the instructions for using the adhesive to ensure that its concentration and thickness are suitable for the wallpaper material, so as to ensure that the wallpaper is firmly pasted.
4. Apply the adhesive: Use a brush or a roller to evenly apply the adhesive to the back of the wallpaper. The application area should not be too large to prevent the wallpaper from losing its stickiness before the adhesive dries, which would affect the pasting effect.
5. Paste the wallpaper: Carefully paste the wallpaper with adhesive applied onto the wall, starting from the top and gradually sliding downwards. At the same time, gently press the wallpaper flat with your hands or a scraper to ensure that the wallpaper is tightly bonded to the wall and avoid air bubbles or wrinkles.
6. Adjust and trim: During the process of pasting the wallpaper, it may be necessary to adjust and trim the wallpaper to fit windows, doors, or other special areas on the wall. Use scissors or a cutting knife for trimming to ensure that the edges are flat.
7. Press and clean: Gently press the wallpaper flat with a scraper or a cloth to make the wallpaper fully bond to the wall. Finally, clean up the excess adhesive or stains on the surface of the wallpaper to keep it clean and beautiful.

Precautions for using container stickers (stickers used to identify information such as cargo)

Ensure that the identification information is accurate and complete, such as the name of the cargo owner and the destination; confirm that the pasting position is appropriate to avoid affecting the loading, unloading, and transportation of the cargo; select the appropriate sticker type according to the type of cargo and transportation requirements. For example, for cargo that is susceptible to moisture, choose stickers with good waterproof performance; determine the quantity and specifications of stickers according to the quantity and type of cargo to ensure clear and accurate identification.