Container House Interior Decoration Tutorial
The interior decoration of a container house can be carried out with reference to the following steps, taking into account both functionality and safety:

1. Sound and Thermal Insulation Treatment
The metal walls of containers have high thermal conductivity and poor sound insulation, so priority should be given to treatment. Stick polystyrene foam boards (recommended thickness: 5-10 cm) to the inner walls of the container, cut them to match the wall dimensions to fill gaps, and embed foam boards of corresponding sizes at the iron door and seal them tightly to reduce heat conduction and noise interference.
2. Wall Reinforcement and Aesthetics
Install gypsum boards (thickness: 9-12 mm) tightly against the foam boards, fill the gaps between the gypsum boards with putty, and sand them until the surface is smooth to enhance structural stability. For higher strength, a wooden keel frame can be added on the outer layer of the gypsum boards to further secure the walls.
3. Ventilation System
Cut a square opening (size adjusted according to the exhaust fan specifications) on the side of the container and install an industrial-grade exhaust fan to ensure air circulation. If used for living, it is recommended to add an air inlet (such as louvers) to form a convection cycle and avoid stuffiness.
4. Door and Window Modification
- Iron Door Optimization: Install a wooden frame beside the iron door, embed sliding glass (such as double-glazed units), adjust the tightness of the sliding rails, and then fix them to improve lighting and sealing.
- Cutting and Installation: Cut an opening directly on the side wall of the container, install a solid wood door (with an anti-theft lock) and light-transmitting windows (recommended to be made of broken bridge aluminum), and reinforce the edges of the opening with angle steel in advance to prevent deformation.
5. Internal Functional Zoning
- Workbench/Furniture: Install metal support brackets and pair them with an adjustable-height workbench (adjustable height range: 70-120 cm) to adapt to different usage scenarios; the bedroom bed adopts a foldable design (such as a wall bed), which can be folded up during the day to save space and unfolded into a double bed at night.
- Kitchen: Adopt a linear layout, install upper and lower cabinets (depth: 35-45 cm) and open shelves along the wall, reserve a work surface (recommended to be made of quartz stone), and integrate a sink and an induction cooker.
6. Hidden Electrical and Plumbing Works
- Electrical Circuit: Plan the positions of switches and sockets in advance (such as beside the bed and above the workbench), lay the wires along the wall grooves, and protect them with PVC flame-retardant pipes; the exhaust pipes should extend to the outside along the top to avoid odor backflow.
- Plumbing: If water is needed, lay PPR water pipes at the bottom of the container, connect them to the water tank and water points, wrap them with thermal insulation cotton for frost protection, and make a waterproof layer (thickness ≥ 2 mm) on the ground.
7. Ceiling Construction
Fix the top structure with light steel keels, use foam boards as the base layer, cover them with oriented strand boards (thickness: 12-18 mm), and use flame-applied waterproof roll materials (such as SBS modified bitumen roll materials) for the surface layer to ensure no leakage risk.
8. Surface Decoration
- Paint: Paint the walls with white and brown latex paint in different colors to increase the sense of hierarchy; or select waterproof wallpaper and paste it directly on the surface of the gypsum boards.
- Veneer: Use high-density wood grain stickers for decoration, and seal the outer layer with gypsum boards to combine aesthetics and durability.
9. External Expansion
Build a steel-frame leisure area (such as a corrosion-resistant wooden platform) beside the container windows and lay outdoor flooring; or connect a terrace (waterproofing and load-bearing treatment are required) to increase activity space.
10. Energy Solutions
Install monocrystalline silicon solar panels (power selected according to electricity demand) on the roof, equipped with an inverter and batteries, to meet basic lighting and electrical appliance power needs; in winter, a solar water heater can be added to reduce energy consumption.




