Container House Installation Video

Currently, there is no direct link to a complete installation video for container houses, but you can refer to the following installation procedures and directions for obtaining video resources:

Regular Container Panel House Installation Procedure

Taking a knock-down container house as an example, the installation steps are as follows:

• Bottom Frame Installation: On a flat ground or workbench, connect the bottom corners of the container to the bottom beams using hexagon socket bolts, but do not tighten them yet. After adjusting to ensure that the diagonal difference of the bottom frame is ≤3mm, tighten the bolts.
• Secondary Beam Installation: Install the π-shaped secondary beams according to the positioning hole positions on the long beams and fix them with m5.519 self-tapping screws. The tops of the π-shaped secondary beams and the bottom beams need to be fixed with st4.816 round-head self-drilling screws.
• Floor Installation: Lay the floor base plates (magnesium oxide boards) along the 6-meter direction. Pre-drill holes at both ends of the base plates and cut the corners according to the chalk lines. Mark the centerline of the π-shaped beams, start laying the floor from one end, align the joints with the centerline of the π-shaped beams, snap chalk lines after laying, and fix them along the chalk lines with st4.2*38 cross-head flat-tail screws at intervals of 300 - 350mm. Sand the entire floor, apply PVC special floor adhesive, wait for 10 - 15 minutes, lay the floor covering, expel the air, and if possible, weld the joints.

Foldable Container Mobile House Installation Procedure

• Preparation: Check the stability of the steel wire ropes and keep non-staff away from the installation area.
• Frame Unfolding: Lift the main frame steadily and unfold it, and place support rods in the middle of the container body to keep it stable.
• Wall Installation: Push open one wall and tighten it with fastening screws, then push open the wall with doors and windows and tighten the screws.
• Lifting and Positioning: Lift the foldable container house to the predetermined installation position and lower it after ensuring that there is no one around.

Video Resource Acquisition

• Douyin: Search for topics such as "#containerhouse", "#containerrealshot", and "#liftingmobilehouse". For example, the link https://www.douyin.com/note/7684853734077445107 may have relevant installation videos.
• Tencent Video: Search for keywords such as "Huailai County Fu'an Prefabricated Container Mobile House", "Ten Fold Modular House", and "Super Cool Foldable House". For example, the links https://m.v.qq.com/play.html?vid=d0888ghg2wt, https://m.v.qq.com/play/play.html?coverid=&vid=f0721bltiin, and https://m.v.qq.com/play/play.html?coverid=&vid=c0528lef7s5 can be used to find installation videos of different types of container houses.
• Baidu Baijiahao: Search for terms such as "container panel house installation diagram" and "foldable container mobile house installation illustration". For example, the links http://baijiahao.baidu.com/s?id=1652230270423493020&wfr=spider&for=pc and http://baijiahao.baidu.com/s?id=1709666321658507716&wfr=spider&for=pc provide detailed installation illustrations and related introductions.