Volver al blog
Artículo

Structural Diagram of Container Board House

Admin 17 de septiembre de 2026

Currently, there is no directly publicly available complete structural diagram of container board houses, but their design logic and core structures can be summarized based on their structural characteristics. As a modular building, the structural design of container board houses needs to balance transportation convenience and residential functionality. The core structures can be divided into the following four parts:

1. Main Frame: High-Strength Steel Structure Support System
The main frame of a container board house is welded from galvanized pipes or high-strength steel, forming a 'beam-column' structure similar to traditional buildings. Unlike the single-layer thin iron sheet and simple frame of traditional iron sheet houses, its frame forms a three-dimensional load-bearing system by adding crossbeams, vertical columns, and diagonal braces, enabling it to withstand greater loads (such as wind pressure, snow pressure, or stacking pressure). Some designs use 'standard container size modules' for splicing, achieving rapid assembly through bolt connections while maintaining structural integrity. Corrosion protection treatments for the frame (such as galvanizing) can extend its service life and adapt to outdoor environments.

2. Wall Structure: Multi-Layer Composite Insulation System
The walls abandon single-layer iron sheets and adopt a 'metal panel + insulation core material + inner lining board' sandwich structure. The outer layer is usually color-coated steel sheets or aluminum-magnesium-manganese alloy sheets, providing rust and corrosion resistance; the middle core material is mostly expanded polystyrene (EPS), rock wool, or polyurethane, with a thickness generally ranging from 50-100mm, effectively blocking heat transfer and solving the problem of 'cold in winter and hot in summer' in traditional iron sheet houses; the inner layer is gypsum board or PVC board, improving wall flatness and aesthetics. Some high-end designs add soundproof felt or air layers to further reduce noise interference.

3. Floor and Roof: Enhanced Comfort Design
The floor adopts a multi-layer structure of 'base plate + moisture barrier + floor covering': the base plate is galvanized steel sheet or plywood, providing basic support; the moisture barrier (such as plastic film or XPS extruded polystyrene board) prevents ground moisture penetration; the floor covering, such as floor leather or wooden flooring, covers the surface to enhance foot comfort. The roof design usually includes 'ceiling + insulation layer + waterproof layer': the ceiling hides pipelines and beautifies the space; the insulation layer uses the same material as the wall core; the waterproof layer uses asphalt felt or TPO membrane to ensure the roof does not leak. Some designs reserve skylights or exhaust vents to improve indoor ventilation.

4. Door and Window System: Double-Glazed Glass and Sealing Optimization
Doors and windows use double-glazed laminated glass (thickness 6-12mm), with inert gas (such as argon) filled between the glass panes, reducing heat conduction by 30%-50% and improving sound insulation performance (reducing noise by more than 30 decibels). Rubber sealing strips are used at the connections between window frames and walls, and anti-collision rubber pads are added to door frames to reduce air infiltration. Some designs use thermal-break aluminum alloy window frames to further block thermal bridges and adapt to extreme climates.

If specific structural drawings are required, it is recommended to contact professional container house manufacturers (such as CIMC Group, YAZHI Integrated Housing, etc.), whose technical documents will include detailed node drawings, material specification tables, and load calculation sheets; or search for standard design cases through industry platforms (such as Zhulong.com, Civil Engineering Network), but it is necessary to check the design specifications and local building requirements.