Container Board House Roof Protective Shed

The prices of container board house roof protective sheds vary depending on the supplier and type, and their construction must adhere to specific standard dimensions and regulatory requirements.

Prices and Suppliers

The prices of container board house roof protective sheds vary among different suppliers. Tianjin Changhong Integrated Housing Co., Ltd. provides services for the disassembly, assembly, repair, and roof installation of color-steel plate protective sheds for construction site containers, with prices starting at 3500 yuan per container. These protective sheds are primarily designed for the roof protection of container houses. Tianjin Xinpeng Huizhong Steel Structure Engineering Co., Ltd. offers distribution box protective barriers, standardized construction site electrical box safety sheds with color-steel roofs, with prices starting at 400 yuan per unit. These protective sheds focus on the safety protection of distribution boxes.

Standard Dimensions of Level 1 Distribution Box Protective Sheds

Level 1 distribution box protective sheds have clear standard dimensional requirements. The shed body is a square box that is 2.4 meters high and 1.96 meters wide, welded with 30 mm thick square steel pipes, resulting in a relatively sturdy structure. A small umbrella-like structure, 50 cm high and 2.42 meters wide, is added on top, making the total height from the ground to the shed roof approximately 2.8 meters. The width can be adjusted according to the size of the distribution box, but it must not be narrower than 1.5 meters; the height must not be lower than 2.2 meters, and the depth must be at least 80 cm. The front 1.2 meters of the shed must be kept clear, and expansion bolts must be driven into the ground for fixation to ensure the stability of the protective shed. It should be equipped with a lockable door that meets the P30 waterproof rating, made of anti-rust material over 1.5 mm thick, and the door should open outward with a lock for convenience and safety. The shed should be tilted at an angle greater than 60 degrees, with the center of the box body 1.4 to 1.6 meters above the ground. No debris should be stacked around to avoid affecting the normal use and safety of the protective shed.

Regulatory Requirements for Distribution Box Protective Sheds

According to Article 6.1.6 of the "Technical Code for Safety of Temporary Electrification on Construction Site" (JGJ46-2005), distribution boxes set up outdoors should be equipped with rain-proof and impact-resistant sheds. The height of the protective shed should not be less than 2.5 meters to ensure a safe space for personnel operation and equipment operation. Additionally, the top should be designed with a slope of more than 5 degrees to facilitate rainwater drainage and prevent water accumulation from causing damage to the protective shed and distribution box.