Concrete Prefabricated House Pouring Video
Currently, we cannot directly provide the link or specific content of the 'Concrete Prefabricated House Pouring Video'. However, we can describe the typical process of concrete pouring in relevant scenarios and offer video search suggestions.

Core Scenarios and Processes of Concrete Pouring in Prefabricated Houses
The pouring of concrete prefabricated houses typically involves key aspects such as foundations, structural frames, and floor slabs. The construction methods vary across different scenarios, but the core logic revolves around 'steel reinforcement - concrete pouring - curing and shaping'.
Foundation Pouring The foundation is the core load-bearing element of a house. During construction, the site must first be leveled, debris cleared, and the soil compacted. Subsequently, the foundation pit is excavated to the designed depth, and a gravel bed is laid at the bottom to enhance drainage. Next, a steel reinforcement frame is erected, with the steel bars fixed through tying or welding to form a grid-like structure that improves tensile strength. Finally, the prepared concrete is poured into the pit, compacted with a vibrating rod to eliminate air bubbles and ensure the concrete fully fills the gaps between the steel bars. The foundation is then left to cure until it reaches the required strength.
High-Rise Building Pipeline Pouring Due to height limitations, high-rise buildings often use overhead pipelines to transport concrete. During construction, a concrete pump truck is set up on the rooftop to deliver the concrete through pressure along the pipelines to the designated floors. Before pouring, the stability of the formwork must be checked to prevent concrete leakage. The pouring should be done in layers, with each layer controlled at a thickness of 30-50 centimeters and compacted with a vibrating rod. After pouring, the surface should be smoothed to prevent cracking.
'Lego-Style' Construction of Fully Concrete Prefabricated Houses Some prefabricated houses adopt a modular design, with wall panels, floor slabs, and other components prefabricated in factories and then transported to the site for assembly. The pouring mainly focuses on the connection points between components, where high-strength concrete or special adhesives are used to fill the gaps, and steel bars are added for reinforcement to ensure overall structural stability. This construction method is efficient but requires strict control over component precision and connection techniques.
Floor Slab Pouring in Rural Self-Built Houses The pouring of floor slabs in rural self-built houses usually follows the sequence of 'beams and columns first, then floor slabs'. First, the beam and column structures are poured. After initial setting, the floor slab formwork is erected, and a steel reinforcement mesh is laid. Subsequently, the concrete is poured and compacted with a flat vibrator. After pouring, the slab should be covered with plastic film or straw mats for curing, with regular watering to maintain moisture and prevent cracking due to rapid water evaporation. The curing period generally lasts no less than 7 days.
Video Search Suggestions
To gain an intuitive understanding of the concrete pouring process in prefabricated houses, you can search for the following keywords on video platforms (such as Bilibili, Douyin, YouTube):
- 'Concrete Pouring Construction Live': You can find on-site construction videos of foundations, floor slabs, and other scenarios.
- 'Concrete House Construction Process': This covers the complete pouring process from the foundation to the main structure.
- 'Prefabricated House Module Assembly': This showcases the connection and pouring details of factory-prefabricated components.
When searching, it is advisable to prioritize videos labeled with tags such as 'construction live' or 'technical explanation', as their content is closer to actual engineering scenarios.




