Citizen Use of Portable Toilets

When citizens use portable toilets, they should follow the following operational guidelines to ensure efficient, hygienic use and maintain the proper functioning of the equipment:

1. Proper Use of the Flushing Mechanism
Portable toilets are typically designed with different buttons or sensor modes for varying flush volumes. For instance, a small volume of water can be used after urination, while a larger volume is required after defecation. This design aims to conserve water and adapt to different usage scenarios. Users should select the appropriate function based on actual needs to avoid misuse that could lead to water wastage or insufficient flushing.

2. Importance of Closing the Toilet Seat After Use
Closing the toilet seat is not only a basic hygiene practice but also a crucial step to trigger internal processes within the equipment. Most portable toilets rely on the closure of the toilet seat to activate ventilation or mixing functions in the degradation chamber, facilitating the biological degradation process. Failure to close the seat may result in reduced degradation efficiency, odor spread, or even affect the lifespan of the equipment.

3. Water-Saving Measures During Handwashing
The water used for handwashing is usually directed into a recycling system for flushing or other reuse. Therefore, it is recommended to use the water-saving hand soap provided by the toilet and avoid using high-foaming or difficult-to-clean cleaning products brought from outside to reduce water consumption and the burden on the recycling system. Additionally, users should control the duration of water flow during handwashing to avoid prolonged water discharge.

4. Proper Disposal of Waste
The facility clearly indicates waste disposal locations through illustrations inside. For example, tissues and sanitary products should be placed in dedicated trash bins rather than flushed directly into the toilet. Incorrect disposal may interfere with the biological degradation process (e.g., clogging the degradation chamber) or damage membrane filtration components (e.g., tissues getting stuck in the filtration system), leading to equipment malfunction or increased maintenance costs.

5. Equipment Status During Non-Usage Periods
Some portable toilets enter a low-power cyclic maintenance mode during non-usage periods, during which some functions (such as lighting and flush sensors) may be temporarily suspended. This is a normal design feature aimed at maintaining the system's continuous operational capability and reducing energy consumption. Users do not need to worry about equipment failure; normal operation will restore functionality when the toilet is used again.

Summary: Proper use of portable toilets requires attention to flush selection, toilet seat closure, water-saving handwashing, waste classification, and understanding equipment maintenance modes. Following these guidelines not only enhances the user experience but also extends the lifespan of the equipment and reduces environmental impact.