Chengde Intelligent Mobile Toilet Installation

The installation of intelligent mobile toilets in Chengde needs to combine the stability requirements of ordinary mobile toilets with the water, electricity, and sealing standards of intelligent equipment. The key steps are as follows:

I. Pre-installation Planning

1. Location Selection: Prioritize flat, open areas that are not prone to waterlogging, avoiding areas that block scenic views or major traffic routes. In the mountainous regions of Chengde, assess the terrain and reinforce the foundation to prevent settlement.
2. Type and Quantity: Select single-unit, multi-unit, or models with barrier-free facilities based on the usage scenario (e.g., scenic spots, construction sites). It is recommended to provide one toilet unit for every 100-200 people, with additional units in high-traffic areas.
3. Infrastructure Construction: The ground needs to be hardened. In mountainous areas, pour a concrete foundation or use steel frames for reinforcement. If connecting to a sewage system, plan the location of the septic tank in advance or connect to the municipal sewage network.

II. Transportation and Installation Process

1. Transportation Preparation:
   • Survey the transportation route to ensure that the road width and turning radius meet the requirements, avoiding low bridges or height-restricted areas.
   • Secure the doors, windows, and internal movable parts of the mobile toilet to prevent damage during transportation.
   • Use a flatbed truck for transportation. The cargo should be secured with ropes and padded with anti-slip materials at the bottom.
2. On-site Installation:
   • Check the site dimensions and lay a concrete foundation (if necessary), ensuring that the horizontal error does not exceed 5mm.
   • When connecting the sewage pipe, measure the distance between the toilet's sewage outlet holes (commonly 305mm/400mm), precisely align the centerlines, use a flange ring for sealing, and do not use cement mortar.
   • For intelligent functions (such as automatic flushing and temperature control), reserve a 220V power outlet, concealedly installed 30-40cm above the side of the toilet, equipped with a splash-proof box.

III. Core Requirements for Intelligent Equipment

1. Concealed Water and Electricity Works: It is recommended to embed the water inlet angle valve before tiling and connect it with a 6-point hose. The power supply should be on a separate circuit to avoid sharing with other electrical appliances.
2. Sealing and Odor Prevention: Use glass glue or neutral sealant to fix the connections at the sewage outlet to ensure no leakage.
3. Energy Efficiency and Environmental Protection: In Chengde, it is recommended to use microbial degradation toilets to reduce sewage discharge and adapt to the mountainous environment.

IV. Maintenance and Cost

1. Regular Maintenance: Clean and disinfect once a month and check the sealing of the sewage system. In winter, add insulation layers to prevent pipe freezing and cracking.
2. Cost Reference: The installation cost for a single unit is approximately 5,000-10,000 yuan (including equipment, transportation, and infrastructure construction), with an annual maintenance cost of about 500-1,000 yuan.

Notes: In Chengde, special consideration should be given to terrain reinforcement and energy efficiency during installation. It is recommended to contact Cangzhou Hengtai Sanitation Equipment Co., Ltd. (Phone: 15232596700) for suitable products and services.