Installation of Mobile Toilets in Zhengzhou Scenic Spots

The installation of mobile toilets in Zhengzhou scenic spots should follow the following procedures and precautions:

I. Preliminary Preparations

1. Demand Communication and Scheme Design: It is necessary to clarify the usage scenarios (such as scenic spot entrances, rest areas, etc.), the estimated number of users, the duration of use, and the location of the site. Based on this information, the rental company recommends toilet types (such as eco-friendly types, barrier-free types, etc.) and plans the layout scheme. For example, areas with high foot traffic require an increased number of toilet stalls, and barrier-free toilets should be located near service facilities.
2. Site Condition Confirmation: Choose a location that is easily accessible and has high foot traffic, ensuring that the ground is level and has drainage conditions, and avoiding low-lying areas prone to water accumulation. If it is a prefabricated toilet, consider its harmony with the surrounding environment, including the integration of building materials, colors, and cultural connotations, to avoid a jarring appearance.

II. Installation Procedures

1. Transportation and On-Site Survey: After the equipment is transported to the site, technicians need to confirm again whether the installation location meets requirements for drainage and ventilation, and plan the optimal placement. For example, ventilation openings should be positioned away from the main direction of foot traffic to reduce odor diffusion.
2. Basic Installation and Supporting Facilities:
   • Secure the equipment in place, ensuring it is level and stable (such as through ground hardening or counterweights). The standard stall size is generally 2.4m × 1.8m, with an installation spacing of no less than 1.5m to avoid overcrowding.
   • Connect the water supply and drainage systems: Ordinary toilets need to be connected to sewage and water supply pipes, while eco-friendly toilets may use vacuum or biodegradation systems; waterless flush toilets require checking the capacity of the fecal storage tank and the cleaning cycle to ensure they meet usage needs.
   • Install ventilation equipment to maintain indoor air circulation, prevent bacterial growth, and equip with exhaust fans or fresh air systems.
3. Detail Handling:
   • Waterproofing: Ensure proper waterproofing on the toilet floor, walls, and ceiling to prevent leakage and structural damage.
   • User-friendly design: Increase the number of female toilet stalls (it is recommended that the male-to-female ratio be 1:1.5 or higher), set up barrier-free access, nursing rooms, and equip with emergency alarm buttons to enhance the user experience.

III. Handover and Maintenance

1. Cleaning and Handover: After installation is complete, thoroughly clean the interior, equip with toilet paper, hand soap, air fresheners, and other supplies, and inform users of daily usage precautions (such as prohibiting the dumping of debris) to avoid clogging pipes.
2. Post-installation Maintenance: During the rental period, regularly clean the septic tank and replace consumables (such as air fresheners and hand soap); after use, withdraw from the site as stipulated in the contract and restore the site to its original condition to avoid leaving behind garbage or damaging the ground.

IV. Customization Suggestions If customizing a prefabricated toilet, note the following:

• The site selection and layout should consider the male-to-female toilet stall ratio and barrier-free facilities to ensure compliance with the "Urban Public Toilet Design Standards."
• Choose water-saving fixtures and energy-efficient lighting, and consider renewable energy sources such as solar power to reduce operating costs.
• Select a manufacturer with independent design capabilities to ensure that the materials are durable and easy to maintain, extending the service life.

It is recommended to complete the rental confirmation and plan the installation location one week in advance to avoid affecting the preparation progress of the scenic spot.