Zhanjiang Mobile Toilet Installation

The installation of mobile toilets in Zhanjiang needs to follow specific requirements and procedures according to different scenarios, covering scenarios such as rentals in Xiashan, sports events, and construction sites. Details are as follows:

Mobile Toilet Rental and Installation in Xiashan, Zhanjiang The business process is divided into six stages:

1. Requirement Communication: Customers contact the service provider via phone, email, or an online platform to clarify requirements such as the type of equipment (e.g., single-unit or connected-unit toilets), quantity, duration of use, and site conditions.
2. Plan Formulation: A professional team designs a rental plan based on the requirements, including equipment selection, layout planning (e.g., entrance and aisle locations), and reservation of water and electricity interfaces.
3. Contract Signing: After both parties confirm the plan, a rental contract is signed, specifying service content, costs, liability for breach of contract, and insurance clauses.
4. Transportation and Installation: The equipment is transported to the site at the agreed time. Before installation, ensure the site is level (slope ≤ 5%), away from water source protection areas (≥ 50 meters) and residential areas (≥ 30 meters), and complete water and electricity connections and sewage pipe leak tests.
5. Commissioning and Acceptance: Focus on checking indicators such as flushing system pressure (≥ 0.15 MPa), ventilation volume (≥ 80 m³/h), and lighting brightness (≥ 100 lx). The municipal department accepts the installation as qualified for use in accordance with the 'Standards for the Installation of Urban Environmental Sanitation Facilities'.
6. Operation, Maintenance, and Recovery: During the event, daily cleaning, consumable replenishment, and a 2-hour response service for faults are provided. After the event, the equipment is removed and the site is cleaned at the agreed time.

Mobile Toilet Installation for Sports Events in Zhanjiang For the rainy and windy climate, the following technical requirements must be met:

1. Structural Protection: Use high-strength waterproof panels (such as fiberglass or PVC composite panels), with silicone sealant applied at joints, and a wind resistance rating of ≥ 10.
2. Capacity Configuration: Equip water tanks (≥ 500 L/unit) and waste tanks (≥ 1000 L/unit) according to the scale of the event, reducing the frequency of waste removal to 1-2 times per day.
3. Modular Design: Support rapid on-site assembly (assembly time for a single unit ≤ 2 hours). After disassembly, it can be transferred to other sites using forklifts or cranes.

Temporary Toilet Installation at Construction Sites in Zhanjiang Configuration should be based on the construction period and worker density:

1. Quantity Planning: Configure according to a worker-to-toilet ratio of 1:20-1:30. For example, a construction site with 100 workers requires 3-5 units.
2. Water and Electricity Support: Connect to temporary water supply pipelines (pressure ≥ 0.1 MPa) and a three-stage sedimentation sewage system to avoid direct discharge into the municipal sewage network.
3. Odor Control: Use biodegradation technology or chemical deodorizers to ensure an odor concentration of ≤ Level 1 (no perceptible odor).