How to Install Mobile Toilets in Yuxi
The installation methods for mobile toilets in Yuxi mainly involve factory prefabrication followed by on-site hoisting or assembly, with specific steps varying depending on the type of toilet.
Installation of Factory-Prefabricated Mobile Toilets
For factory-prefabricated mobile toilets, they are typically transported to the site as a whole or in modular form. Before installation, the foundation must be leveled to ensure a solid and level ground, providing stable support for subsequent hoisting or assembly. After that, use professional hoisting equipment to lift the entire mobile toilet and accurately place it in the predetermined position. If it is in modular form, assemble it according to the design drawings, connecting and fixing each module in sequence. After completing the hoisting or assembly, connect the water and electricity lines to ensure normal water and electricity supply for the toilet, and it can be quickly put into use.
Installation of Mobile Toilets for the Elderly and Other Mobile Commodes
- Unpacking Inspection: Upon receiving the package of the mobile toilet (commode), open it immediately to check if all accessories are complete. Carefully verify against the accessory list. If any accessories are missing or damaged, promptly contact the merchant for replacement or reshipment to avoid affecting the subsequent installation progress.
- Installation Details for Different Models
- Non-Steel-Bar Mobile Commodes: First, insert the anti-slip strips into the outer side of the commode base to ensure they are firmly installed, preventing slipping during use. Then, install the front and rear handles of the commode bowl, place the commode bowl inside, and cover it with the lid. Next, align and insert it into the slots, aligning the slots of the two parts and pressing down firmly to embed all the buckles in sequence. Insert plastic plugs at both ends of the support rods and insert them horizontally into the slots. When installing the part connecting to the commode and the part connecting to the backrest, first align the slots of the part connecting to the commode and press down firmly, then install the part connecting to the backrest, align the slots, and press down.
- Other Models of Mobile Commodes: For components such as armrests and backrests, the installation method is relatively simple. They can be inserted upwards, either to the left or right, and adjusted according to usage habits during installation.
- Overall Inspection: After installation is complete, conduct a comprehensive inspection of the mobile toilet (commode). Check if all components are firmly installed and free from looseness; check the stability by gently shaking to see if it wobbles; check if facilities such as the commode bowl are correctly installed and can function normally.
Installation of Customized Mobile Toilets
The enterprise will provide a reasonable design plan based on the on-site conditions provided by the user. After confirmation, it will enter the factory prefabrication stage. The production cycle is generally around 7 to 15 days, depending on the complexity of the plan. After prefabrication is complete, it will be transported to the site for installation.
