Dimensions of Mobile Toilets in Yuncheng Scenic Areas

The dimensions of mobile toilets in Yuncheng scenic areas vary depending on the type and functional requirements, with common specifications as follows:

Single-Person Mobile Toilets
The standard size is generally 110 cm in length, 110 cm in width, and 230 cm in height. The mini single-person model measures 100 cm in length, 100 cm in width, and 220 cm in height. The minimum size of the basic single-person unit (independent type) is approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height, with the standard size being about 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height. The length range of single-compartment mobile restrooms is 1.2 - 1.5 meters, the width is 1.0 - 1.2 meters, and the height is 2.2 - 2.5 meters. These toilets are suitable for areas with low visitor traffic, meeting the needs of single-person use. They are typically equipped with basic sanitary facilities and feature compact yet fully functional space designs.

Double-Person Mobile Toilets
The common size is 180 cm in length, 110 cm in width, and 230 cm in height. The standard size of the double-person unit (with two toilet compartments) is approximately 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height. The length range of double-compartment mobile restrooms is 2.4 - 3.0 meters, the width is 1.2 - 1.5 meters, and the height is 2.2 - 2.5 meters. These toilets are suitable for areas with high visitor traffic, improving usage efficiency by increasing the number of toilet compartments. The internal space layout needs to consider the convenience of simultaneous use by two people, such as reasonably planning the partition and aisle widths.

Barrier-Free Mobile Toilets
These toilets are generally larger in size, typically measuring 180 cm in length, 150 cm in width, and 240 cm in height. Barrier-free public toilets require a minimum length of 2 meters, a width of 1.5 meters, and a height of 2.4 meters, with models also available in the size of 1.5 m × 1.8 m × 2.4 m. These toilets must meet barrier-free design requirements such as wheelchair turning space and handrail installation. Sufficient operating space needs to be reserved inside, for example, the door width should be greater than 90 cm to facilitate wheelchair access, and the floor should be kept flat without steps.

Multi-Functional and Multi-Unit Mobile Toilets
The length range of multi-functional mobile restrooms is 3.0 - 4.5 meters, the width is 2.0 - 2.5 meters, and the height is 2.5 - 3.0 meters. They may integrate functional areas such as management rooms and tool rooms. Multi-unit (4 - 6 toilet compartments) mobile toilets are approximately 5 - 8 meters in length and 2 meters in width, with the height not fully mentioned but usually consistent with standard models. These toilets are suitable for large scenic areas or event venues, enabling rapid deployment and flexible combination through modular design.