Yulin Mobile Toilet Usage Standards

The usage standards for mobile toilets in Yulin can refer to the following general specifications, covering size, equipment, usage, and special scenario requirements:

I. Size Standards

1. Basic Models: The standard size for a single-occupancy unit is 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height, suitable for wheelchair assistance. The standard size for a double-occupancy unit is 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height, including two compartments and a shared sink.
2. Functional Models: Accessible public toilets require a length of ≥2 meters, a width of 1.5 meters, and a height of 2.4 meters, with a reserved wheelchair turning space of 1.5 meters × 1.5 meters, equipped with handrails (height 0.85-0.9 meters), non-slip flooring, and an entrance ramp (slope ≤1:12). Maternity/family public toilets are approximately 2.2 meters in length, 1.8 meters in width, and 2.4 meters in height, equipped with baby changing tables and children's toilets.
3. Special Scenarios: Temporary public toilets for scenic spots or large events, with multiple units (4-6 toilet stalls), are approximately 5-8 meters in length, 2 meters in width, and 2.3 meters in height.

II. Equipment Standards

1. Quantity Allocation: Allocate one mobile toilet per 100 people as a standard. During peak hours, a single toilet stall can serve 8-12 people per hour, and a 10-stall public toilet can serve 80-120 people per hour.
2. Area Requirements: Each mobile toilet should have an area of no less than 1.2 square meters to ensure user mobility.
3. Facility Requirements: Basic equipment includes sinks, mirrors, toilets, tissue dispensers, and trash bins. Accessible public toilets require additional low-level coat hooks and emergency call devices. Maternity public toilets need to be equipped with baby changing tables.

III. Usage Requirements

1. Cleaning and Maintenance: Keep the interior and exterior clean after use, dispose of waste in trash bins, and avoid clogging or pollution.
2. Resource Conservation: Conserve water and prohibit disposing of toilet paper or debris in toilets or sinks to prevent pipe blockages.
3. Safety Regulations: Be cautious of slipping to avoid falls due to wet floors or unstable facilities. Malicious damage to facilities, such as breaking locks or toilets, is strictly prohibited.

IV. Other Considerations

1. Gender Toilet Stall Ratio: It is recommended to allocate stalls at a ratio of 1:2 or 1:3 to alleviate queuing issues for women.
2. Discharge Method Selection: Flush toilets require connection to a water source and sewage network; waterless packing or foam-sealing toilets require regular cleaning of the fecal storage tanks (capacity 100-200 liters per stall).
3. Environmental Adaptation: In cold regions, insulation measures should be taken to prevent pipe freezing; in hot regions, ventilation or cooling designs should be enhanced to avoid overheating inside.

The above standards integrate general specifications for mobile toilets and are applicable to the planning, construction, and daily management of mobile toilets in the Yulin area.