Yulin Intelligent Mobile Toilet Specifications

There is no specific publicly available information on the exact specifications of Yulin's intelligent mobile toilets, but common specifications for mobile toilets can be categorized into the following types based on usage scenarios and functional requirements:

I. Common Specifications Classified by Structure

1. Single-Compartment Mobile Toilet The length typically ranges from 1.2 to 1.5 meters (regular model: 1.1 meters, mini model: 1.0 meters), the width from 1.0 to 1.2 meters (regular model: 1.1 meters, mini model: 1.0 meters), and the height from 2.2 to 2.5 meters (regular model: 2.3 meters, mini model: 2.2 meters). These specifications are suitable for scenarios with limited space and low foot traffic, such as construction sites and small events, with a design focus on portability and basic functionality.

2. Double-Compartment Mobile Toilet The length ranges from 2.4 to 3.0 meters (double-occupancy shared model: approximately 2.5 meters, double-occupancy model: 1.8 meters), the width from 1.2 to 1.5 meters (double-occupancy shared model: 1.1 meters, double-occupancy model: 1.1 meters), and the height from 2.2 to 2.5 meters (double-occupancy shared model: 2.3 meters, double-occupancy model: 2.3 meters). These are suitable for large events and tourist attractions that need to accommodate multiple users simultaneously, improving usage efficiency by increasing the number of toilet compartments.

3. Barrier-Free Mobile Toilet The length ranges from 1.5 to 1.8 meters, the width from 1.5 to 1.8 meters, and the height is 2.4 meters. These specifications must meet the requirements for wheelchair turning space and are suitable for large parks, scenic area entrances, and other scenarios that need to accommodate individuals with special needs, with a design that complies with relevant standards for barrier-free facilities.

4. Multi-Functional Mobile Toilet The length ranges from 3.0 to 4.5 meters, the width from 2.0 to 2.5 meters, and the height from 2.5 to 3.0 meters. These are suitable for high-end events and long-term fixed locations that require the integration of additional functions (such as management rooms and storage rooms), with higher requirements for structural stability and space utilization.

II. Custom Specifications for Special Scenarios

• Small Portable Foldable Model: Dimensions can be reduced to 1 meter × 1 meter × 2 meters, facilitating rapid deployment and transportation, suitable for temporary and short-duration events.
• Multi-Person Model: Common dimensions are 3.6 meters (width) × 1.2 meters (length) × 2.2 meters, suitable for parks, sports venues, and other high-traffic scenarios, with some products supporting modular assembly to expand capacity.
• Public Toilet Specifications: Standard dimensions for finished public toilets are 12.0 meters (length) × 7.5 meters (width), including men's and women's toilets and a management room, suitable for long-term use in urban public facilities.

III. Design Considerations and Industry Standards

• Basic Parameters: The width of toilet compartments should be ≥0.9 meters, and the recommended height for sinks is 0.8 to 0.9 meters; materials should preferably be lightweight and high-strength composites (such as fiberglass) to reduce weight.
• Functional Requirements: A drainage system should be designed at the bottom, and walls should use waterproof materials; compliance with the Urban Public Toilet Design Standard (CJJ 14-2016) is required, with some regions imposing additional requirements on dimensions and environmental performance.
• Usage Limitations: Consider road height and width restrictions during transportation, ensure a level ground during installation, and regularly maintain drainage and ventilation equipment.