Installation of Mobile Toilets at Yuhuangmiao

The installation of mobile toilets at Yuhuangmiao should follow a general process, adjusted according to on-site conditions. The specific steps are as follows:

I. Preliminary Preparations

1. Site Selection and Confirmation

   • Choose a flat area with good drainage and away from water source pollution, ensuring a solid ground. If the ground is soft, lay wooden planks or gravel to enhance load-bearing capacity.
   • Check for obstacles (such as trees or utility poles) that may affect the entry and exit of mobile toilets. For tourist attractions or event venues, obtain temporary facility approval in advance.

2. Toilet Type Selection

   • Choose the type based on usage needs:
     • Integrated Toilets: Easy to install, requiring only hoisting into place on-site and connecting to water, electricity, and sewage pipes.
     • Split-type Toilets: First install the chassis, then assemble the wall panels and roof panels in sequence, securing them with bolts or clips. Suitable for long-term fixed use.
     • Foam-type Toilets: Water-saving and odor-reducing, suitable for tourist attractions or high-traffic areas. Requires connection to a foam generation system and regular removal of the fecal storage tank.

II. Installation Steps

1. Foundation Fixation

   • Use expansion screws or counterweights to secure the toilet, preventing movement due to wind. For split-type toilets, ensure the chassis is in close contact with the ground to avoid wobbling.

2. Facility Connection

   • Water and Electricity Connection: Connect to a temporary power source or generator, and test whether the lighting and flushing systems are functioning properly. For foam-type toilets, check if the foam liquid supply pipes are unobstructed.
   • Sewage Disposal: Connect the drainage pipes to a septic tank or sewage system according to site conditions. For foam-type toilets, reserve a removal channel for the fecal storage tank.

3. Function Debugging

   • Check the door locks, ventilation system, and sealing to ensure no water leakage and normal electrical circuits. Replenish consumables such as toilet paper and hand soap, and test functions like flushing and foam generation.

III. Key Considerations

1. Team Experience

   • Prioritize professional construction teams. A skilled team can install a split-type toilet in about 2-4 hours and dismantle it in about 1-3 hours, significantly improving efficiency and reducing risks.

2. Maintenance Standards

   • Regularly clean and disinfect, and check for aging of bolts and seals. For foam-type toilets, replenish foam liquid every 1-2 weeks and clean the pipes to prevent blockages.

3. Compliance

   • Follow standards such as the Hygiene Standards for Mobile Toilets (GB/T 21239-2023) to ensure structural safety and hygiene compliance, avoiding demolition or fines due to non-compliance.

IV. Adaptation to Special Scenarios

• If Yuhuangmiao is a tourist attraction or event venue, foam-type toilets are more suitable due to their water-saving and odor-reducing properties. Manufacturers usually offer integrated services including leasing, installation, and maintenance.
• For long-term use, it is recommended to choose a reputable leasing company, clarify installation and dismantling times and costs, and sign a contract to avoid disputes.

The installation process should be flexibly adjusted according to the on-site conditions at Yuhuangmiao (such as terrain and foot traffic) and the toilet model to ensure safety, hygiene, and practicality.