Yangquan Scenic Area Mobile Toilet Solution

The Yangquan scenic area mobile toilet solution covers project overview, design standards, construction preparation, optional types, and service standards, as detailed below:

Project Overview: Utilizing a modular design, it features strong mobility, easy installation, and environmental protection and energy efficiency. It strictly adheres to public toilet design standards and formulates construction processes and quality control standards based on Yangquan's climatic characteristics and usage needs.

Design Standards and Technical Parameters:

• Basic Design Indicators: A frame-type modular structure with individual dimensions of 3.2m×2.4m×2.8m, which can be combined into multi-unit restrooms. Each unit is equipped with toilets, sinks, and other facilities, with a male-to-female toilet ratio of 1:1.5 and at least one barrier-free toilet. Environmental requirements include a wind resistance rating of ≥8, a seismic fortification intensity of 6 degrees, an indoor winter temperature of ≥10℃, and a summer ventilation rate of ≥8 times per hour.
• Material Technical Standards: The frame structure's main frame is welded from 8# channel steel, with columns made of 50×50×3mm galvanized square steel, all coated with epoxy zinc-rich primer and outdoor-specific topcoat. The wall materials consist of an outer layer of 0.8mm thick color-coated steel plate, an inner layer of 12mm thick fire-resistant and moisture-proof density board, and a 50mm thick polyurethane insulation cotton filling in between. The floor material is 20mm thick anti-slip and wear-resistant stone-plastic flooring. The roof system uses Owens Corning roofing color-coated steel plates with a 5° slope, ventilation louvers installed at the ridge, and drip lines added at the eaves.

Construction Preparation:

• Site Survey and Planning: Select a site with flat terrain, good drainage, and away from flammable and explosive materials. Clear obstacles, mechanically level the site, and set up drainage ditches and foundation construction.
• Material and Equipment Preparation: Provide a material procurement list specifying material names, specifications, units, quantities, and quality requirements.

Optional Types:

• Foam Technology Mobile Toilets: Utilize electrolyzed water foam technology to create fine foam that covers the inner cavity of sanitary fixtures, killing bacteria, removing odors, and eliminating visual pollution and odor emission issues.
• Vacuum Toilet Restrooms: Use air pressure differentials to suction away waste with minimal water usage, solving odor problems in small spaces.

Service Standards: Cover various aspects such as regular equipment inspections and maintenance, external and indoor cleanliness requirements, ensuring the toilets are clean and the facilities are functioning properly.