Xuchang Intelligent Mobile Toilet Installation

The installation of intelligent mobile toilets in Xuchang requires following standardized procedures such as site selection, foundation treatment, sewage and power configuration, modular installation, and collaboration with service providers. The specific steps are as follows:

1. Site Selection and Site Preparation

   • Site Selection Principles: Prioritize locations within a 30-meter walking distance from activity areas to ensure convenience of use. Avoid low-lying areas (to prevent water accumulation), windy spots (to reduce odor dispersion), and heavily trafficked pedestrian pathways, while considering privacy and safety.
   • Site Treatment: For hard foundations (e.g., concrete floors), thoroughly level and compact the surface. For soft ground (e.g., mud or sand), lay steel plates or use heavy-duty bases to enhance stability.

2. Sewage System Installation

   • Sewage Disposal Method Adaptation: Select the sewage disposal type (flush, packing, foaming, or microbial decomposition) based on the toilet model and configure corresponding facilities. For example, flush-type toilets must be connected to municipal sewage networks or designated collection points; direct discharge into natural water bodies is prohibited. Packing-type toilets require reserved space for fecal storage tanks and ensure airtightness.
   • Pipe Connection: Use leak-proof materials for sewage pipes and design an appropriate slope (usually ≥2%) to prevent blockages or backflow.

3. Power and Energy Configuration

   • Power Supply: Some models (e.g., htcs-259) require a 220V power connection. Reserve dedicated outlets during installation and ensure the circuit's load capacity meets equipment requirements.
   • New Energy Utilization: If using solar power, assess sunlight conditions in advance, install solar panels, and connect energy storage batteries. Air conditioning facilities require separate circuit configurations.

4. Modular Structure Assembly

   • Main Body Installation: Intelligent mobile toilets often use modular materials such as color-coated steel plates or metal embossed panels. Assemble walls, roofs, and doors/windows according to the instructions, ensuring airtight connections.
   • Smart Module Debugging: Smart components like sensors and automatic flushing devices must be installed by professional technicians. Test sensitivity and stability (e.g., infrared sensing range, flushing duration).

5. Environmental Protection and Convenience Optimization

   • Water-Saving System: Check that water-saving valves or foaming devices operate correctly to ensure water consumption is half that of ordinary toilets.
   • Odor Control: Equip fecal storage tanks with activated carbon filters or biodegradable agents. Use reinforced sanitary-grade EPS panels for walls to minimize odor leakage.

6. Service Provider Collaboration and Acceptance

   • Contract Terms: Prioritize local service providers (e.g., Cangzhou Hengtai Sanitation Equipment Co., Ltd.). Clearly define installation/removal timelines, maintenance scope (e.g., daily cleaning, fault repairs), and responsibility allocation.
   • Final Inspection: During acceptance, focus on testing sewage disposal, power supply, smart functions, and airtightness to ensure compliance with environmental standards (e.g., no leakage, no odor).

Tip: For detailed technical documentation on smart module installation, contact the supplier directly (e.g., Cangzhou Hengtai, phone: 15232596700) for support.