Xinzhou Mobile Toilet Specifications

The specifications of prefabricated mobile toilets in Xinzhou vary depending on the model, function, and usage scenario. Common specifications are as follows:

Regular Model Specifications
Taking the model htcs-528 produced by Cangzhou Hengtai Sanitation Equipment Co., Ltd. as an example, its standard dimensions are 1200×1500×3000 millimeters (length×width×height). This type of specification is suitable for small and medium-sized public places, such as communities, streets, or temporary event venues, and can meet basic usage needs.

General Size Categories

1. Single-Compartment Mobile Toilets: Length 1.2-1.5 meters, width 1.0-1.2 meters, height 2.2-2.5 meters. This specification is suitable for low-traffic scenarios, such as small parks or temporary construction sites, and is usually equipped with a squat toilet or sit toilet and a simple sink inside.
2. Double-Compartment Mobile Toilets: Length 2.4-3.0 meters, width 1.2-1.5 meters, height 2.2-2.5 meters. Suitable for medium-sized events or venues, such as schools and commercial districts, these can accommodate two people simultaneously and may include additional features like independent compartments or barrier-free facilities.
3. Multi-Function Mobile Toilets: Length 3.0-4.5 meters, width 2.0-2.5 meters, height 2.5-3.0 meters. This specification is commonly found in large events or scenic spots, and may integrate a management room, baby care room, and third-gender toilet inside to meet diverse needs.

Special Scenario-Adapted Specifications

1. Temporary Public Toilets for Scenic Spots/Large Events: Multi-unit (4-6 toilet compartments) structures with a length of approximately 5-8 meters and a width of 2 meters, suitable for high-traffic scenarios, enabling rapid deployment through modular assembly.
2. Large Container-Type Mobile Toilets: Length can exceed 6 meters, width over 2.5 meters, usually equipped with an independent sewage system, air conditioning, and ventilation equipment, suitable for long-term fixed use or extreme environments.

Design Standards and Customization Requirements
All specifications must comply with the provisions of the Urban Public Toilet Design Standard (CJJ 14-2016), such as a toilet compartment width of no less than 0.9 meters and a recommended sink height of 0.8-0.9 meters. During actual procurement, suppliers can make customized adjustments based on the usage scenario (e.g., altitude, climate), functional requirements (e.g., water-saving systems, intelligent monitoring), and budget.