Xinzhou Mobile Toilet Dimensions and Specifications

No specific dimensions and specifications for mobile toilets in Xinzhou have been found yet, but the following are the common dimensions and specifications of finished mobile toilets:

Single-Person Mobile Toilets

• Regular Model: It measures 110cm in length, 110cm in width, and 230cm in height, which is equivalent to 1.1m in length, 1.1m in width, and 2.3m in height. This size of mobile toilet has a relatively moderate space, meeting the basic usage needs of a single person. Basic facilities such as a toilet and a sink can be installed inside.
• Mini Single-Person Model: It is 100cm long, 100cm wide, and 220cm high, that is, 1m long, 1m wide, and 2.2m high. With a smaller volume, it is more portable and suitable for places with limited space or high requirements for mobility.
• Small Portable Foldable Model: Its size can be reduced to 1m×1m×2m. This design facilitates transportation and storage, and it can be quickly unfolded for use when needed. A single-toilet-cubicle mobile public toilet usually covers an area of about 1.2㎡ - 1.8㎡. The common internal net dimensions are 1.2m - 1.5m in length × 1.0m - 1.2m in width, and the height is generally between 2.2m - 2.5m. There may be some differences among different manufacturers and designs.

Double-Person Mobile Toilets

• Common Dimensions: It is 180cm long, 110cm wide, and 230cm high, that is, 1.8m long, 1.1m wide, and 2.3m high. This size can accommodate two people simultaneously, improving usage efficiency and being suitable for places with a large flow of people.
• Double-Person Shared Model: The length will increase to about 2.5m, the width remains 1.1m, and the height is still about 2.3m. Its internal space is more spacious, better meeting the needs of two people using it at the same time. A double-toilet-cubicle mobile public toilet covers an area of about 3㎡ - 4㎡, and the specific dimensions will vary according to the internal layout and design.

Accessible Mobile Toilets

• General Dimensions: It is 180cm long, 150cm wide, and 240cm high, that is, 1.8m long, 1.5m wide, and 2.4m high. This relatively large size is designed to facilitate the use of people with mobility impairments, with a more open internal space.
• Other Dimensions: There is also a size of 1.5m×1.8m×2.4m. The internal net dimensions of an accessible toilet cubicle must not be less than 1.8m×1.4m, and an accessible ramp with a width of more than 0.8m must be set at the entrance to ensure that wheelchairs and other assistive devices can enter and exit smoothly.