Wuzhou Adult Mobile Toilet Specifications
The specifications of adult mobile toilets in Wuzhou vary depending on the type, with common specifications as follows:
Single-person Type: The standard size is generally 110cm in length, 110cm in width, and 230cm in height, suitable for single-person use, commonly found in ordinary parks, temporary construction sites, and small event venues. The mini single-person model measures 100cm in length, 100cm in width, and 220cm in height, often used in crowded small exhibitions and commercial streets. There are also claims that the minimum size for a basic single-person unit is approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height, with a standard size of about 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height. Another common specification is 1.2 meters (width) × 1.2 meters (length) × 2.2 meters (height). These single-person mobile toilets of different sizes can be selected based on the spatial constraints and pedestrian traffic density of the specific usage scenario while meeting single-person restroom needs.
Double-person Type: The size is typically 180cm in length, 110cm in width, and 230cm in height, accommodating two people simultaneously, suitable for team-building venues, outdoor camping areas, and other scenarios requiring simultaneous restroom use by multiple people. There are also claims that the length of double-person shared models increases to about 2.5 meters, with the width remaining at 1.1 meters and the height still around 2.3 meters. The standard size for a double-person unit is approximately 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height, featuring double compartments and a shared sink. Another double-person size is about 2.4 meters (width) × 1.2 meters (length) × 2.2 meters (height), with independent compartments inside to enhance usage efficiency. Double-person mobile toilets can effectively alleviate the pressure of simultaneous restroom use by multiple people and improve usage efficiency.
Barrier-free Type: These toilets are larger in size, generally measuring 180cm in length, 150cm in width, and 240cm in height, with reserved space for wheelchair rotation, facilitating use by individuals with mobility impairments, commonly found in large parks and scenic area entrances. There are also requirements for barrier-free public restrooms to be at least 2 meters in length, 1.5 meters in width, and 2.4 meters in height, with a reserved wheelchair rotation space of at least 1.5 meters × 1.5 meters, handrail heights ranging from 0.85 to 0.9 meters, non-slip floors, and an entrance ramp slope of ≤1:12. The typical size of a barrier-free mobile toilet is 1.5m × 1.8m × 2.4m. Barrier-free mobile toilets fully consider the needs of individuals with mobility impairments, embodying a human-centered design philosophy.
Other Special Specifications: The size of small portable folding models can be reduced to 1m × 1m × 2m, suitable for scenarios with limited space or only temporary use. Some products support customization, such as 1.6 meters × 1.6 meters for a single squat position or 3.2 meters × 1.6 meters for a double squat position, meeting personalized needs.
