What to Do If the Toilet Cannot Be Moved

When the toilet cannot be moved, you can choose methods such as using a toilet offset connector, raising the floor, creating a new hole, switching to a rear-discharge toilet, adjusting a sunken bathroom, or rearranging the sewer pipe layout based on specific needs and bathroom conditions to achieve relocation.

1. Using a toilet offset connector: If the toilet needs to be moved a short distance (generally no more than 10cm, with some products reaching up to 3m), a toilet offset connector can be used. As a pipe fitting, it connects the original sewage pipe to the new toilet's sewage outlet, serving as a transition. However, using an offset connector may affect the flushing effect, increase the risk of blockage, and the longer the relocation distance, the more prone it is to blockage. Additionally, ensure that the floor tiles have been laid before installation.
2. Raising the floor for relocation: When the toilet needs to be moved a long distance, or if there is no backfill layer or insufficient backfill layer on the bathroom floor, relocation can be achieved by raising the floor. Lay pipes on the floor and lead them to the new toilet position, then raise the floor to bury the pipes. This method can hide the pipes and enhance aesthetics, but it may cause inconvenience in use and affect the overall appearance of the bathroom. However, for sunken bathrooms, the rectification process is simpler.
3. Creating a new hole for relocation: If there is sufficient space below the bathroom floor slab and consent has been obtained from the downstairs owner, you can choose to create a new hole for relocation. Open a new sewage outlet below the floor slab and lead the pipes to the new toilet position. This method is less prone to blockage during later use, but it involves modifying the water pipe structure, which is a large and cumbersome project. If construction problems arise, it will seriously affect the drainage system of the entire floor's bathrooms. Therefore, proper waterproofing measures must be taken during construction.
4. Switching to a rear-discharge toilet: When the toilet needs to be moved a long distance and you do not want to raise the floor, consider switching to a rear-discharge toilet. Its sewage pipe can run along the wall, making it easier to handle pipe concealment. However, the selection and installation of a rear-discharge toilet require professional personnel to ensure its normal use and safety.
5. Adjusting a sunken bathroom: If the bathroom adopts a sunken design, the toilet position can be changed more flexibly and diversely, and adjustments can be made freely according to the advice of professional craftsmen.
6. Rearranging the sewer pipe layout: If you need to change the position of the sewer pipes, be sure to fully communicate with the downstairs residents. Usually, installing a large elbow on the ceiling downstairs is a better choice, which can effectively reduce the risk of blockage. However, relevant treatment must be carried out again after the changes are completed.