Weinan Mobile Toilet Specifications

The specifications of mobile toilets in Weinan are divided into three categories based on usage scenarios and functional requirements: basic models, functional models, and special-scenario adaptations. Specific dimensions and design points are as follows:

I. Basic Mobile Public Toilets

1. Single-Occupancy (Standalone): The minimum dimensions are 1.2 meters in length, 1 meter in width, and 2.2 meters in height, suitable for temporary locations with limited space; the standard dimensions are 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height, providing more spacious interiors to meet basic usage needs.
2. Double-Occupancy (Two Toilet Stalls): The standard dimensions are 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height, including two separate stalls and a shared sink, ideal for areas with high foot traffic, such as scenic spot entrances or temporary event venues.

II. Functional Mobile Public Toilets

1. Barrier-Free Toilets: Designed to accommodate wheelchair access, the minimum dimensions are 2 meters in length, 1.5 meters in width, and 2.4 meters in height. The interior must reserve a 1.5-meter by 1.5-meter turning space for wheelchairs and be equipped with handrails and low-position sinks, complying with barrier-free design standards.
2. Maternity/Family Toilets: Approximately 2.2 meters in length, 1.8 meters in width, and 2.4 meters in height, these toilets include, in addition to standard stalls, an infant changing table, a child's toilet, and safety seats, catering to families or maternity groups.

III. Special-Scenario Adaptations

1. Multi-Occupancy Models: Suitable for high-traffic areas such as parks and sports venues, common dimensions are 3.6 meters in width, 1.2 meters in length, and 2.2 meters in height. Some products support modular assembly to expand capacity, meeting large-scale usage demands.
2. Compact Models: Constructed with lightweight steel frames or fiberglass materials, dimensions can be reduced to 6 meters in length and 2 meters in width, making them lightweight and easy to transport, ideal for mobile scenarios such as temporary exhibitions or construction sites.

IV. General Design Considerations

1. Standard Compliance: All specifications must comply with the Urban Public Toilet Design Standard (CJJ 14-2016), including stall spacing, ventilation requirements, and odor control designs.
2. Transportation and Installation: Design considerations must include road height restrictions (typically not exceeding 4.5 meters) and width limits. Before installation, ensure the ground is level to prevent structural deformation due to unstable foundations.

Local manufacturers in Weinan, such as Guting Metal Products Factory, offer a variety of options, supporting customization of dimensions and materials according to actual needs, and providing direct factory supply services to ensure product adaptability and cost-effectiveness.