How to Replace the Pocket in a Mobile Toilet

The method for replacing the pocket in a mobile toilet depends on its type. The replacement process for the degradable bag in a packaged mobile toilet is as follows:

Preparation Before Replacement

• Confirm System Status: Check whether the alarm device is functioning properly. If a replacement prompt has been triggered, you can proceed directly with the operation; if not, manually inspect whether the sensor is working correctly to avoid delayed replacement or misjudgment due to sensor failure.
• Prepare Tools: For some models of mobile toilets, special tools such as clamps and wrenches are required when replacing the degradable bag. It is advisable to refer to the equipment manual in advance to ensure that all necessary and suitable tools are available, thereby improving replacement efficiency and avoiding operational errors.

Replacement Steps

• Remove the Old Bag:
  • Step on the pedal or activate the electric drive rod to pull the packaged bag down into the toilet bowl and clamp it tightly, ensuring the old bag is fixed.
  • Loosen the clamps at the remaining bag opening, lift and tie the bag opening to prevent the old bag from falling off or leaking waste.
  • Place the entire old bag into the waste box or fecal storage tank to avoid environmental pollution and keep the operating area clean.
• Install the New Bag:
  • Lift the new degradable bag, tie one end, and place it around the edge of the toilet bowl to ensure the new bag is in the correct position.
  • Step on the pedal or activate the electric drive rod to pull the new bag down and clamp it tightly. Check the tightness to avoid urine or waste leakage.
  • Double-check whether the bag opening is tightly sealed to ensure the new bag is firmly installed and guarantees usage effectiveness.

Precautions

• Avoid touching the inside of the toilet bowl during operation to prevent damage to the packaging system or equipment failure.
• If the system does not automatically alarm, manually inspect whether the sensor is functioning properly and promptly troubleshoot.
• After replacement, promptly clean up any residual waste to maintain equipment hygiene and prevent bacterial growth or odor.

Maintenance Recommendations

Regularly inspect the wear and tear of the packaged bags and promptly replace aged or damaged degradable bags to extend the service life of the equipment and ensure environmental protection effects.