Toilet Seat Left-Right Movement

The left-right movement of a toilet seat can be achieved through methods such as using a toilet offset connector, converting floor drainage to wall drainage, directly extending or shortening pipes in a sunken bathroom, or modifying the sewage pipe in a neighbor's home for inter-floor drainage. Details are as follows:

Using a toilet offset connector: Also known as a deflector or sewage offset connector, it is a pipe fitting used for toilet installation that can solve the problem of misalignment between the reserved sewage outlet in the bathroom and the sewage outlet of the toilet, preventing proper connection. Using an offset connector is relatively simple for modifications, but there are limitations on the moving distance. When using an offset connector for inter-floor drainage, the moving distance should preferably not exceed 2m, and it is best to create a drainage slope, otherwise, it is prone to blockage. The depth of the offset connector is generally 5 centimeters within the sand-ash layer. During installation, the sand-ash should be cleaned thoroughly to prevent it from falling into the pipe. Additionally, if the hole of the offset connector is larger than the toilet's sewage outlet hole, blockage will not occur.

Converting floor drainage to wall drainage: Connect the toilet directly to the sewage riser, but the toilet can only be moved to the adjacent wall of the sewage riser, not to the opposite wall. This method of relocation makes the toilet less prone to blockage after modification and is applicable to both same-floor and inter-floor drainage. However, converting to wall drainage requires building a false wall, which can be combined with niches during renovation to create storage space and increase practicality.

Directly extending or shortening pipes in a sunken bathroom: The floor level of a sunken bathroom is relatively low, and the internal floor can be modified. You can choose to directly extend or shorten the pipes to achieve toilet relocation. This method takes advantage of the structural characteristics of a sunken bathroom and is relatively straightforward in operation, but it requires professional construction personnel to ensure the rationality and tightness of pipe installation.

Modifying the sewage pipe in a neighbor's home for inter-floor drainage: Go to the neighbor's home and directly modify the sewage pipe to the desired position. The simplicity of this method lies in the fact that if the neighbor agrees, the modification difficulty is relatively low. However, the challenge is how to persuade the neighbor to agree to such a modification, which requires good communication and negotiation with the neighbor, and ensuring that the modification complies with relevant building codes and safety requirements.

During the left-right movement of the toilet, there are also some operational details to pay attention to, such as marking with a line when moving left to ensure it can be covered, trying to place it close to the wall, keeping it 10 centimeters away from the angle valve, ensuring it is level and vertical, digging 9 centimeters deep, filling it with waterproofing compound, and installing a sealing ring to ensure normal use of the relocated toilet and prevent water leakage issues.