Moving the Toilet Position by One Meter

Moving the toilet position by one meter can reduce the risk of blockage if appropriate measures are taken, but improper handling can easily lead to blockage.

Moving the toilet by one meter indeed poses a risk of blockage. Ordinary flat-pipe shifters can only support a maximum shift of 15 centimeters. Long-distance shifting can easily lead to the accumulation of dirt, which in turn causes blockage. However, the following measures can effectively reduce the likelihood of blockage:

• Understand the bathroom drainage method: In the case of same-floor drainage, shifting the toilet is relatively easier to achieve because the pipe layout is on the same floor, facilitating adjustments. For interlayer drainage, special attention must be paid to the pipe direction and structure to avoid damaging the original drainage system. If the downpipe has a U-bend, it is highly discouraged to shift the toilet because two traps will create air pressure, leading to poor drainage.
• Use appropriate pipes and ensure slope: Use 110 pipes and ensure that the pipes have a certain inclination angle to help waste discharge smoothly. At the same time, try to use a standard single-cylinder toilet and slightly elevate the outlet to increase drainage power.
• Avoid throwing large debris: In daily use, avoid throwing leftovers, large objects, etc., into the toilet and flushing them away. These debris can easily accumulate in the pipes and cause blockage.

If shifting is necessary, consider the following options:

• Elevate the floor by 20 centimeters, lay standard 110mm pipes, and ensure sufficient slope to ensure smooth drainage.
• Install a wall-mounted toilet directly. Although it is more expensive, it can be directly connected to the main sewage pipe and has a strong flushing force. During construction, ensure that the slope is visibly downward and avoid throwing paper towels and other debris into the shifted toilet.
• Build a raised platform, similar in principle to a toilet shifter, but use a normal 110-type downpipe. This method is more suitable for squat toilets.
• For a general flat floor, the most cost-effective method is to modify the pipes from the floor below, but this requires negotiation with neighbors and ensuring that the construction complies with relevant regulations.