Toilet Movable Water Pipe

The toilet movable water pipe mainly achieves short-distance displacement through a dedicated displacement device. Attention should be paid to slope and elbow control. The prices of accessories vary depending on the type, and professional services can solve complex problems.

Applicable Scenarios and Tool Selection

The core requirement of the toilet movable water pipe is to solve the short-distance (within 40 centimeters) displacement problem of the toilet's drain pipe. Commonly used tools include dedicated flat displacement devices and round pipes, both of which need to maintain a 1%-2% slope to ensure smooth drainage. If the slope is insufficient, it may lead to sewage retention or bad odors; if the slope is too steep, it may affect the stability of the pipes. In addition, reducing the number of elbows is crucial. Too many elbows will increase water flow resistance and the risk of blockage. For example, if the toilet position needs to be moved horizontally by 20 centimeters, a flat displacement device can be directly used to connect the original drain outlet to the new position, avoiding additional elbows.

Accessory Types and Price Ranges

Most movable water pipe accessories on the market are made of PVC, and their prices vary greatly depending on their functions and designs:

• Elbow types: For example, a 110 flat 90-degree elbow is used to change the direction of the pipe. Its wholesale price is approximately ¥8.82, suitable for scenarios requiring right-angle turns.
• Straight pipe types: For example, a 110 flat straight pipe is used to extend the length of the pipe. Its wholesale price is approximately ¥6.93 and can be used in combination with elbows.
• Integrated displacement devices: These integrate rubber rings and anti-clogging designs and support 2.5-10 centimeters of horizontal displacement. Their prices can be as low as ¥2.85, suitable for small-scale adjustments.
• Displacement devices with rubber rings: For example, a 10cm toilet sewage pipe uses rubber rings for sealing to reduce the risk of leakage. Its price is approximately ¥13.0, suitable for scenarios with high sealing requirements.

Professional Services and Costs

If pipe collapse repair, complex displacement, or overall upper and lower water pipe installation are involved, it is advisable to choose professional services. For example, Beijing Jielida Pipeline Engineering Co., Ltd. provides services related to movable toilets, including sewage pipe repair and upper and lower water pipe installation, with a single service price of ¥100.00. Such services are suitable for scenarios such as the renovation of old houses or severe damage to the pipe system, and can avoid problems such as water leakage or poor drainage caused by self-operation.

Precautions

1. Slope control: After displacement, use a level to check the slope of the pipe to ensure it meets the 1%-2% standard.
2. Sealing: Use rubber rings or sealant to treat the joints to prevent sewage leakage.
3. Material compatibility: The new accessories need to match the material of the original pipes (such as PVC or cast iron) to avoid corrosion or loose connections.
4. Acceptance test: After installation, conduct a water flow test to observe the drainage speed and check for any leakage.