Toilet Mobile Stool Installation Guide

Here are the installation guides for different models of toilet mobile stools:

YC713 Commode Chair Installation:

1. Unpacking Inspection: Open the packaging, take out the main product body and all accessories, and confirm that there are no missing or damaged parts.
2. Unfolding the Main Frame: Fully unfold the main frame, fasten the parking buckles on both sides tightly to ensure a stable structure.
3. Installing the Seat Plate: Align the seat plate buckles with the crossbar of the main frame and press down vertically until fully engaged to prevent looseness.
4. Assembling the Footrests: Insert the footrest support tubes into the holes on the footrests, press the ball bearings until they fully pop out, and confirm that the connections are secure.
5. Placing the Commode Bucket: Place the commode bucket steadily into the designated position at the bottom of the main frame to ensure good sealing.
6. Pre-use Adjustment: Before the user sits down, adjust the brakes to the locked position, gently place the feet after lowering the footrests; when pushing, the caregiver should release the brakes, and before getting off the chair, adjust the footrest support tubes to be parallel to the ground.
7. Safety Precautions: The front wheels are small, so it is forbidden to go over obstacles directly while someone is sitting on it; when pushing, fasten the safety belt, and when going over obstacles, reverse so that the large wheels go first.

KJ6204 Folding Commode Chair Installation: Currently, only the title is provided, and the specific steps are not clear. It is recommended to refer to the product manual or contact after-sales service for detailed guidance to avoid structural instability or damage due to improper operation.

General Folding Commode Chair Installation:

1. Basic Assembly: Insert the two leg tubes into the corresponding holes on the main frame to ensure sufficient insertion depth.
2. Height Adjustment: If height adjustment is required, loosen the screw of the threaded rod, move it to the appropriate hole position, and then tighten it again to prevent sliding during use.
3. Folding Function: After installation, it can be folded for storage, which is suitable for environments with limited space. Be careful when handling it.

Installation Features of the 'Squat-to-Sit' Chair:

1. Bottom Adaptation: Adapt to different sizes of squat toilets through an adjustable base. Measure the opening width of the squat toilet before installation.
2. Independent Leg Adjustment: Use a wrench to adjust the height of each of the four legs separately to keep the chair level. The adjustment time is about 3-5 minutes.
3. Stability Check: After installation, gently shake the chair to confirm that there is no shaking or abnormal noise before using it.

Precautions:

• Read the manual carefully before installation to confirm that all accessories are complete.
• When adjusting the height or angle, use the matching tools (such as a wrench) to avoid damaging the threads.
• Regularly check whether the buckles, screws, and other connecting parts are loose to ensure safety during use.