Toilet Mobile Chair Installation Video Translation

Currently, there is no directly embedded installation video for the toilet mobile chair, but installation steps for two common models are provided as a reference, and it is recommended to obtain video tutorials through official channels.

I. Installation Steps for YC749 Commode Chair (Text Description)

1. Unfold the Main Frame: After opening the package, unfold the main frame from its folded state to its usable form, ensuring that all connecting parts are properly latched.
2. Install the Armrests: Align the armrests with the mounting holes on both sides of the main frame and secure them with screws (some models may come pre-installed).
3. Place the Seat Plate: Lay the seat plate flat on the support surface of the main frame, ensuring it is aligned with the slots before securing it.
4. Install the Leg Tubes: Adjust the height of the leg tubes according to your needs and lock them in place using knobs or latches.
5. Place the Commode Bucket: Insert the commode bucket into the reserved slot at the bottom of the main frame, ensuring it is stable and does not wobble.
6. Install the Backrest (Optional): If the model is equipped with a backrest, connect it to the rear of the main frame and secure it.

Note: This model does not come with a video tutorial. Before installation, it is recommended to check the accessory list against the instruction manual to avoid omissions.

II. Installation Steps for YC7813 Commode Chair (Including Key Points for Video Operation)

1. Unfold the Main Frame: Unfold the main frame from its folded state, ensuring that all support rods are fully extended and locked.
2. Engage the Parking Latch: Locate the parking latch at the bottom of the main frame and press it down to the 'locked' position to prevent movement during installation.
3. Install the Wheels:
   • Align the wheel axles with the mounting holes at the bottom of the main frame and insert spring washers to increase stability.
   • Install the brake locks and test whether the brake function is normal (the wheels should not rotate when the brakes are applied).
4. Place the Commode Bucket: Insert the commode bucket into the central recess of the main frame, ensuring it is aligned with the drainage hole.
5. Fold Up the Footrest: If the model is equipped with a foldable footrest, fold it up to a vertical position after installation to avoid interference with use.

Video Acquisition Suggestions: The installation video for this model focuses on operational demonstrations but is not directly embedded in the response. You can search for 'YC7813 commode chair installation video' on e-commerce platforms (such as Taobao or JD.com) or contact the brand's official customer service to obtain exclusive tutorial links.

III. General Recommendations

1. Prioritize Official Tutorials: Installation steps may vary among different brands and models, and official videos are usually more detailed and safer.
2. Check Accessory Completeness: Before installation, verify that small accessories such as screws and washers are complete to avoid interruptions during the process.
3. Test Stability: After installation, gently shake the chair to ensure there is no looseness, paying special attention to checking the brake function of the wheels and the fixation of the leg tubes.

If you need further information on the operational details of specific models, it is recommended to provide the product name or images for precise resource location.