Toilet Glass Sliding Bar

There are various types of water barriers commonly used for toilet glass sliding doors, and their prices vary depending on the material and specifications. When installing, attention should be paid to the height difference to prevent water overflow.

Types and Prices of Water Barriers

1. Silicone Water Barrier for Toilet Wet-Dry Separation: This type of water barrier is primarily made of silicone, offering good flexibility and waterproof performance, suitable for wet-dry separation areas in toilets. Its price is relatively low, approximately ¥20.00 per meter, but usually requires a purchase of over 10 meters.
2. Nuoye Glass Door Sealing Strip: This sealing strip is mainly used for sealing between glass doors and walls or floors. The material may be rubber or other synthetic materials, with an extremely affordable price of only ¥3.00 per meter. However, the purchase quantity needs to reach over 5000 meters, making it suitable for large-scale procurement or engineering use.
3. Integrated Adhesive Backing Self-Adhesive Water Barrier: This type of water barrier features an integrated adhesive backing, facilitating easy self-installation without the need for additional tools or materials. Its price is moderate, approximately ¥10.00 per meter, with a minimum purchase quantity of 1 meter, suitable for home renovation or small-scale renovations.
4. Water Barrier at the Bottom of Shower Room Glass Door: Specifically designed for shower rooms, it effectively blocks water splashes during showering, keeping the floor dry. Its price is the same as that of the integrated adhesive backing self-adhesive water barrier, ¥10.00 per meter, with a minimum purchase quantity of 1 meter.
5. Manufacturer-Supplied Soft Rubber Self-Adhesive Water Barrier for Bathroom Glass Door: Made of soft rubber with a self-adhesive design, it is easy to install and can tightly fit the bottom of the glass door to prevent water leakage. Its price is slightly higher than the previous types, approximately ¥15.00 per meter, with a minimum purchase quantity of 1 meter.

Installation Recommendations

When installing glass sliding doors, it is recommended to install the glass sliding doors on top of the water barriers to ensure effective water blocking. Meanwhile, the height difference between the water barrier and the tiles should be controlled at around 3 centimeters. This height difference can effectively block water flow while avoiding safety hazards such as tripping caused by excessive height differences. If the height difference is not set properly, water can easily overflow from the gaps between the water barrier and the tiles, affecting the usage effect.