How to Flush Mobile Toilets in Tibet
The flushing methods for mobile toilets in Tibet mainly include high-pressure air-water flushing, foam flushing, and foot-operated automatic flushing in some simple toilets.
High-pressure air-water flushing: This is a relatively common flushing method for mobile toilets in Tibet. Its working principle involves using high-pressure water flow and gas together to flush the inner walls of the toilet bowl. This flushing method has significant advantages. It has a high flushing pressure and a wide range, enabling it to quickly and effectively flush away waste in the toilet bowl. Moreover, it only requires one-fifth of the water used in a regular flush to complete a full flushing process, greatly conserving water resources. In terms of control, it is achieved through an infrared sensor and a computer intelligent system. When someone uses the toilet, the infrared sensor detects the person's departure signal and transmits it to the computer intelligent system. Upon receiving the signal, the system immediately activates the high-pressure air-water flushing device to flush the toilet. The entire process is highly automated and very convenient to use.
Foam flushing: In this flushing method, the equipment room is equipped with an automatic foam generator. The automatic foam generator can convert a specific mixture into a large amount of snow-white foam, which covers the surface of the toilet bowl. When someone uses the toilet, this foam generated from the mixture is used instead of regular water for flushing. The foam has excellent lubricating and wrapping properties, allowing it to wrap around waste and flush it away smoothly. At the same time, the foam forms a sealing layer on the surface of the toilet bowl, effectively blocking the emission of odors and keeping the air inside the toilet fresh. This method also saves a large amount of water resources and is very suitable for use in Tibet, where water resources are relatively scarce.
Foot-operated automatic flushing in some simple mobile toilets: In some simple mobile toilets, a foot-operated black ball is used to achieve automatic flushing. When a user finishes using the toilet, they simply need to step on the black ball with their foot to trigger the flushing device and complete the flushing of the toilet bowl. This method is simple to operate and has a low cost, making it suitable for places with relatively low facility requirements and high mobility.
