Drawing Mobile Toilets in Tianzheng Architecture

When drawing mobile toilets in Tianzheng Architecture, you can utilize its functions to quickly complete the layout of walls, sanitary fixtures, and partitions. You can also operate using the tr plugin based on Revit. Here are the specific steps:

Drawing with the Tianzheng Drawing Plugin

1. Drawing the Wall Space
   Open the CAD software and activate the Tianzheng drawing plugin. Click on 'Draw Walls' in the toolbar. Use the F8 vertical lock function to ensure the walls are horizontal and vertical. Draw a closed wall space as the framework for the mobile toilet.

2. Arranging Sanitary Fixtures

   • Select 'Room Roof - Room Layout - Arrange Sanitary Fixtures' in the left toolbar. After entering the sanitary fixture arrangement page, the system will pop up a sanitary fixture selection page.
   • Select the required type of sanitary fixture (such as a squat toilet) on the sanitary fixture selection page. Double-click or click to confirm and return to the drawing page.
   • Set the placement method of the sanitary fixtures in the top-left window of the drawing page and select 'Uniform Distribution' in the bottom-left corner.
   • Click on the wall surface where you want to place the sanitary fixtures. The system will prompt you to enter the number of sanitary fixtures. Enter the required number and press the spacebar. The system will automatically complete the placement of the sanitary fixtures. For example, under the 'Room Roof' tab in the Tianzheng Architecture menu bar, click on the 'Room Layout' tab, then click on 'Arrange Sanitary Fixtures'. Select the style of the squat toilet, double-click the squat toilet block, and in the pop-up arrangement settings window, click on the second panel (Uniform Distribution panel) at the bottom row. According to the command line prompt, select the wall object for arranging the sanitary fixtures, enter the number of uniformly distributed sanitary fixtures (such as 3), right-click with the mouse, and you will see the sanitary fixtures uniformly distributed in the drawing. Right-click again to exit the command.

3. Arranging Partitions

   • Find the 'Arrange Partitions' command in the left toolbar and click to confirm to start setting up the partitions for the sanitary fixtures.
   • Hold down the mouse and draw a line that passes through all the sanitary fixtures. After releasing the mouse, the system will ask you to enter specific attribute information for the partitions. The system will automatically set default values according to the sanitary fixtures. You can directly press the spacebar to confirm or enter relevant data information for the partitions and then press the spacebar. After completing the input of the partition information, the partitions for the sanitary fixtures will be automatically placed between the sanitary fixtures. For example, click on 'Arrange Partitions' under the 'Room Layout' tab. When the command line prompts you to enter the starting and ending points, click on the starting and ending points in the drawing with the mouse. The line formed by the starting and ending points should cross the sanitary fixtures. If you select the starting and ending points of the inner walls, the arrangement will fail. Then the command line will prompt you for the partition length and door width. Set them according to your needs. If you use the default values, just right-click with the mouse.

Drawing with the tr Plugin Based on Revit

1. Arranging Sanitary Fixtures
   Select the sanitary fixtures to be arranged and click 'Arrange' to place them directly in the view. If you click 'Set Distance', you can arrange multiple sanitary fixtures at a certain interval at once. After setting the parameters, click 'Arrange' and place them in the plan view. Click on the placement position to complete the arrangement of the first sanitary fixture. A line will connect the first sanitary fixture with the mouse. Select the placement direction of other sanitary fixtures and click the left button to complete the arrangement of multiple sanitary fixtures.

2. Drawing Pipelines
   Click on 'Draw Pipelines', select the pipeline type and system type. Drainage pipelines need to have a slope. Draw the pipelines directly in the plan view.

3. Connecting Pipelines to Sanitary Fixtures
   For pressure flow pipelines, you can choose 'Surface-mounted along the wall' or 'Concealed in the wall'. For gravity flow pipelines, you can choose 'Add an S-shaped trap' or 'Add a P-shaped trap'. After setting, the status bar will prompt 'Please select the pipeline to be connected'. Select the pipeline and then it will prompt 'Please frame-select the sanitary fixtures to be connected'. The system will automatically complete the pipeline connection. Perform the same operation to connect the drainage pipelines and automatically generate an S-shaped trap.