Three-Story Container House Size Diagram

Currently, there is no direct standard size diagram for three-story container houses, but relevant size information can be provided for reference.

I. Common Specifications and Sizes According to available data, the typical specifications for a three-story office container house are 3 meters (width) × 6 meters (length) × 2.8 meters (floor height). These container houses usually adopt a modular design, with a uniform floor height of 2.8 meters, reaching a total height of 8.4 meters (including floor slab thickness). The standard container has an area of 18 square meters (3×6), suitable for office and residential use.

II. Size Design Features

1. Modular Combination: Containers of this specification can expand their area through horizontal or vertical splicing. For example, horizontally splicing two 3×6-meter modules creates a 3×12-meter linear space, while vertically stacking three layers forms a vertical space to meet different functional needs.
2. Floor Height Limitations: The 2.8-meter floor height complies with conventional building standards, but it is important to note that the total height of three stories may be subject to local building regulations (e.g., some regions stipulate that temporary buildings must not exceed 9 meters in height).
3. Area Calculation: Taking 18 square meters per floor as an example, the total building area for three floors is 54 square meters. If priced at 155 yuan per square meter, the total cost of a single container is approximately 8,370 yuan (excluding transportation and installation costs).

III. Application Scenarios and Precautions

1. Office Use: A three-story container house can be divided into meeting rooms, offices, and other areas through internal partitions, with stair space (usually occupying 4-6 square meters) needing to be reserved.
2. Residential Use: If used for residential purposes, additional modules such as bathrooms and kitchens need to be added, and compliance with fire safety regulations (e.g., setting up escape routes) must be ensured.
3. Structural Safety: Three-story containers require reinforcement design (e.g., adding columns and beams) to ensure stability, especially in areas with strong winds or frequent earthquakes, where additional calculations are necessary.

IV. Suggestions for Obtaining Size Diagrams If detailed size diagrams are required, contact container house manufacturers or design units and provide the following information for customization:

• Intended use (office/residential/commercial);
• Expected area or number of modules;
• Local building regulations (e.g., height and seismic resistance requirements);
• Special requirements (e.g., balconies, mezzanine floors).

Currently, there is no complete size diagram for three-story container houses in publicly available materials, but the above specifications and design principles can serve as a reference.