Back to blog
Article

The Use of Prefabricated Piles in House Foundations

Admin September 18, 2026

The use of prefabricated piles in house foundations is a common and effective pile foundation construction method, offering numerous advantages and adhering to specific production and construction standards.

Characteristics and Applicability of Prefabricated Piles

Prefabricated piles are widely used in pile foundations for construction projects, characterized by ease of production, high strength, strong load-bearing capacity, minimal settlement deformation, and high construction efficiency. Their cross-sectional shapes vary, allowing them to be made into square, circular, and other forms, enabling flexible adaptation to different geological conditions and engineering requirements. Their applicability covers foundation treatment scenarios such as silt, silty soil, cohesive soil, silt, sand, and artificial fill, particularly suitable for projects with high load-bearing requirements or complex geological conditions.

Production Standards and Requirements

  1. Production Site and Process: Concrete prefabricated piles can be produced in factories or on construction sites. When produced on-site, tool-type wooden or steel molds are commonly used, set up on a solid and level ground surface, with production carried out using the intermittent overlapping method to enhance efficiency. Long piles need to be produced in sections, with the length of each section determined by considering factors such as the effective height of the pile frame, site conditions, and transportation and handling capabilities.
  2. Reinforcement and Concrete Requirements: The position of reinforcement in piles must be strictly ensured to be correct to guarantee the structural stability of the pile body. The concrete strength grade should be no less than C30 to meet load-bearing requirements.
  3. Strength and Transportation Standards: The concrete of prefabricated piles must reach 70% of the designed strength standard value before lifting and 100% before transportation to prevent damage to the pile body due to insufficient strength during transportation.

Construction Process and Control Standards

  1. Pile Driving Sequence: Select an appropriate sequence based on engineering conditions. For example, expanding from the center outward is suitable for dense pile foundations, large sites with soft soil or soil with compaction effects; advancing from one side to the other is suitable for long and narrow sites or projects with obstacles on one side; zone-skipping driving is suitable for ultra-dense pile groups, soft soil foundations, or projects with strict requirements for the impact on the surrounding environment.
  2. Construction Control Standards: End-bearing piles are primarily controlled by penetration, while friction piles use elevation as the main reference standard. Throughout the construction process, pile driving parameters (such as the number of hammer blows and pile sinking depth) must be recorded as acceptance criteria.

Prefabricated piles, through standardized production and refined construction, can effectively enhance foundation load-bearing capacity and reduce settlement deformation, serving as a reliable foundation solution in modern construction projects.