Taikang Mobile Toilet Custom Size

The custom size of mobile toilets in Taikang needs to be determined through consultation with suppliers based on specific requirements. Currently, there is no unified standard, but common specifications and customization principles can be referred to.

The size design of mobile toilets should comprehensively consider usage scenarios, functional configurations, and transportation and installation conditions. Common standard sizes are divided into two categories: single-pit and double-pit.

1. Single-Pit Mobile Toilets The typical external dimensions of a standard independent single-pit mobile toilet are as follows:

• Length: 1.2 meters to 1.5 meters
• Width: 1.0 meter to 1.2 meters
• Height: 2.2 meters to 2.5 meters These dimensions are suitable for scenarios with limited space or low foot traffic, such as temporary events and remote areas of scenic spots. The internal space needs to accommodate a squat toilet, ventilation equipment, and basic movement requirements. Some products further save space through optimized layouts, such as folding doors and compact sanitary ware.

2. Double-Pit Mobile Toilets The common dimensions of a double-squat mobile toilet are:

• Length: 3.2 meters
• Width: 1.6 meters This design is suitable for scenarios with high foot traffic, such as construction sites and markets. The double-pit layout improves usage efficiency, but it is necessary to ensure that the internal passageway width (usually ≥0.8 meters) to avoid congestion.

3. Customization Principles If standard sizes cannot meet requirements, customization can be arranged with suppliers:

• Space Expansion: Increase the length or width according to site conditions, such as adding a management room, barrier-free facilities, or storage space.
• Functional Adjustments: Configure different equipment based on usage scenarios (such as urinals, sinks, and baby-changing tables), requiring corresponding adjustments to the internal layout.
• Transportation Restrictions: Custom sizes must comply with road transportation regulations (such as a total width ≤2.5 meters and a total height ≤4 meters) to avoid transportation difficulties due to oversize.

4. Precautions

• On-Site Measurement: Accurately measure the installation site dimensions before customization and reserve sufficient passageway space.
• Compliance: Ensure that the design complies with local health, fire safety, and barrier-free facility regulations.
• Supplier Communication: Provide a detailed list of requirements (such as the number of users, functional configurations, and budget) so that suppliers can offer reasonable solutions.

The customization of mobile toilets requires balancing practicality, cost-effectiveness, and compliance. It is recommended to prioritize experienced suppliers and determine the final size through case references and solution comparisons.