Suqian Public Mobile Toilet Dimensions

The dimensions of public mobile toilets in Suqian vary depending on their type, function, and usage scenarios. Common standards are as follows:

I. Standard Dimensions by Type

1. Single-Person Luxury Type: Length 1.2m × Width 0.8m × Height 2.2m, with an internal space of approximately 0.96㎡. This type of toilet is compactly designed, suitable for small events or temporary single-person usage scenarios, such as street temporary service points and small community events.
2. Double-Person Standard Type: Length 1.8m × Width 1.0m × Height 2.3m, with an internal space of 1.8㎡. It can accommodate two people simultaneously and is commonly found in family gatherings and small exhibitions, balancing efficiency and space utilization.
3. Multi-Person Eco-Friendly Type: Length 3.0m × Width 1.2m × Height 2.4m, with 2-4 compartments and an internal space of 3.6㎡. It is suitable for large-scale scenarios such as construction sites and music festivals, supporting multiple people using it simultaneously and meeting high-traffic demands through modular design.
4. Barrier-Free Type: Length 2.5m × Width 1.5m × Height 2.4m, equipped with handrails, disabled-specific facilities, and barrier-free ramps. This type of toilet is specially designed for special populations and is commonly found in scenic spots and public event venues, requiring sufficient space for wheelchair rotation and operational convenience.

II. Basic Dimension Range (Excluding Special Functional Areas)

1. Single-Compartment Mobile Public Toilet: Occupies an area of approximately 1.2㎡1.8㎡, with common internal net dimensions of length 1.2m1.5m × width 1.0m1.2m and height 2.2m2.5m. These dimensions balance stability and mobility, suitable for most conventional scenarios.
2. Multi-Compartment Mobile Public Toilet: Taking a double-compartment toilet as an example, it occupies an area of approximately 3㎡4㎡; for three compartments and above, the area needs to be stacked according to the number, with each additional compartment increasing the usable area by approximately 1.5㎡2㎡. The overall length is mostly between 3m6m, and the width is usually 1.5m2.5m, requiring flexible adjustment according to site conditions.

III. Functional Partition Dimensions (Including Special Needs)

1. Barrier-Free Compartment: The internal net dimensions must not be less than 1.8m×1.4m, with a barrier-free ramp wider than 0.8m at the entrance and sufficient space reserved inside the compartment for wheelchair rotation. This design must comply with the requirements of the "Barrier-Free Design Code" to ensure the safety of special populations.
2. Baby Care Room/Third Restroom: The area is generally not less than 4㎡, requiring facilities such as baby care tables and children's toilets, with a net width of ≥1.5m to ensure operational space. This type of functional area needs to cater to the usage needs of both adults and children, with attention to detail and humanization in design.

The above dimension standards are common specifications for public mobile toilets in the Suqian area. When selecting, comprehensive evaluation should be conducted based on specific usage scenarios, pedestrian flow, and functional requirements.