Single-Person Mobile Toilet Installation

The installation of a single-person mobile toilet requires selecting the appropriate steps based on the type. Common types include basic mobile toilets and Kaifeng standalone mobile toilets. The specific installation process is as follows:

Basic Mobile Toilet Installation

1. Anti-slip Treatment: Install silicone anti-slip pads at the four corners of the bottom to ensure stable contact with the ground when the device is placed, preventing sliding or tipping.
2. Bucket Assembly: Align the upper and lower bucket interfaces, press down to secure the buckles, ensuring a sealed connection without gaps to prevent sewage leakage.

On-site Installation of Kaifeng Standalone Mobile Toilet for Rent

1. Pre-installation Preparation

   • Site Planning: Confirm the installation location in advance, avoiding low-lying areas prone to water accumulation, high-voltage lines, and obstacles; measure the site dimensions to ensure the width of the access passage is ≥1.2 meters, reserving space for operations.
   • Material Inspection: Check the quantity, model, and accessories of the mobile toilets (such as sinks, flushing devices, sewage pipes, etc.), ensuring the equipment is undamaged externally and the internal facilities are intact.
   • Tools and Personnel: Equip with tools such as wrenches, screwdrivers, and spirit levels, arrange 2-3 professional personnel, and coordinate with a crane for transportation if necessary.

2. On-site Installation Execution

   • Foundation Fixation: Use a crane to lift the toilet body to the designated position, adjust the equipment level using a spirit level with a deviation ≤3mm; secure it with expansion bolts or counterweights to prevent tipping due to wind.
   • Water and Electricity Connection: Connect the sewage pipe to the sewer or sewage collection tank, ensuring the pipe slope is ≥2%; connect to the water source (water pipe diameter ≥DN20), and test the flushing function and drainage sealing.
   • Detail Refinement: Install accessories such as door curtains and anti-slip mats, check the flexibility of door locks and flush buttons; clean and disinfect the interior, and place amenities such as air fresheners and toilet paper.

3. Post-installation Acceptance

   • Function Testing: Press the flush button three times continuously to confirm smooth drainage; evenly step on the top of the equipment to check structural stability.
   • Document Delivery: Provide the customer with an 'Equipment Installation Acceptance Form', indicating the installation date, warranty period, and usage instructions.

Precautions and Safety Regulations

• Safety Requirements: Wear safety harnesses for high-altitude work, prohibit installation in wind speeds ≥5 or during rainy/snowy weather; keep away from fire sources, and prohibit smoking or using open flames inside the toilet.
• Construction Management: Designate the construction area and set up warning signs; equip with lighting and reflective strips for night construction to prevent access by unauthorized personnel.