Images of Simple Toilet Moving Methods

Since images cannot be provided directly, here is a detailed introduction to the moving methods and related key points of simple toilets:

Preparations Before Moving

• Assess the toilet structure: First, identify the type of simple toilet. Common types include brick-built simple toilets and plastic mobile toilets. For brick-built ones, check for any looseness or cracks in the walls to ensure they won't collapse during the moving process. For plastic ones, check if the connecting parts are secure and free from damage.
• Plan the moving route: Based on the target location where the toilet is to be moved, plan a flat, spacious, and obstacle-free route. Avoid areas with steps, slopes, or narrow passages to prevent collisions or getting stuck during the move.
• Prepare tools and manpower: Depending on the size and weight of the toilet, prepare appropriate tools such as crowbars, rollers, and jacks. If the toilet is heavy, organize sufficient manpower; generally, at least 4 - 6 people are needed to work together.

Moving Process

• Brick-built simple toilets: If the toilet is small in scale, you can first dig out some space around the bottom of the toilet, then insert crowbars and slowly pry it up with multiple people applying force simultaneously to lift the bottom off the ground. Next, place rollers under the bottom and use the rolling motion of the rollers to move the toilet. During the move, continuously adjust the position of the rollers to maintain the toilet's balance. If the toilet is large in scale, you may need to use a jack to lift one corner of the toilet first, place rollers underneath, and then proceed with the move.
• Plastic mobile toilets: These toilets are usually relatively light. You can first loosen the connecting parts of the toilet, such as doors and windows, to reduce resistance during the move. Then, multiple people lift the toilet together and move it along the planned route. If the toilet has wheels at the bottom, you can directly push it, but be sure to control the speed and direction to avoid collisions.

Post-moving Handling

• Inspect and adjust: After moving the toilet to the target location, carefully check all parts of the toilet for any damage, such as cracks in the walls or loose connecting parts. If any damage is found, repair and reinforce it promptly.
• Secure the toilet: To prevent the toilet from moving again or being blown over by the wind, it needs to be secured. You can drive ground stakes around the bottom of the toilet and then connect the toilet to the stakes with steel wires. Alternatively, you can build a low wall around the toilet to increase its stability.