Simple Portable Toilet Production Diagram

Currently, there is no ready-made detailed production diagram for a simple portable toilet, but you can roughly understand the production key points based on the process of a young man using a water storage tank to make a portable toilet:

I. Basic Frame Construction

1. Water Storage Tank Processing: Select an appropriate water storage tank and use an angle grinder to split it in half lengthwise to serve as the main container for making the portable toilet.
2. Mobile Device Installation: Prepare a wooden board and fix universal wheels at its four corners. This makes it convenient to move and position the entire portable toilet.
3. Height Increase: Take several wooden strips and fix them to the upper side of the tank with self-tapping screws to increase the overall height of the toilet and provide space for installing other components later.

II. Wall and Roof Construction

1. Doorway Creation: Use an angle grinder again to create a doorway at an appropriate position on the side of the water storage tank for people to enter and exit.
2. Door Frame Making: Install foam strips on both sides of the doorway to form the shape of a door frame in preparation for installing a door.
3. Heightened Wall Construction: Take plastic soft boards and insert them between the wooden strips to form heightened walls, providing a certain degree of shielding and protection.
4. Roof Installation: Place the upper half of the water storage tank on top of the wooden strips to serve as the roof of the toilet, providing shelter inside.

III. Functional Component Installation

1. Waterproofing Treatment: Apply white waterproof paint to the wooden strips to prevent them from getting damp and rotting, thus extending their service life.
2. Simple Door Making: Use foam strips to splice discarded honeycomb wooden boards to make a simple door and install it on the door frame.
3. Drainage System: Create a hole at the bottom of the tank and install a drain pipe to form a floor drain for easy sewage discharge. Drill holes on the side and bottom of a plastic bucket and connect them with direct fittings. Place the plastic bucket on the roof to form a small water storage device for collecting rainwater, etc. Connect the drain pipe to a sewage tank to ensure proper sewage discharge.
4. Bathing Facilities: Connect the water pipes made into a bath heater. Install a tee under the water inlet pipe and connect it to a showerhead to meet bathing needs. Horizontally connect a water pipe to the tee on the water outlet pipe and extend it to the doorway as the water inlet pipe for a hand-washing basin for convenient hand-washing.
5. Toilet Installation: Place the toilet on the hole of the drain pipe, install the water tank properly, and fix it with glass glue to ensure normal use of the toilet.