Simple Portable Toilet for Home Use

There are mainly three ways to make a simple portable toilet for home use:

I. Using a water storage tank You need to prepare materials such as a water storage tank, wooden boards, universal wheels, wooden strips, self-tapping screws, sponge strips, plastic soft boards, foam strips, honeycomb wooden boards, drainage pipes, plastic buckets, a shower made from water pipes, three-way joints, showerheads, a toilet, and a water tank. First, use an angle grinder to split the water storage tank in half. Fix universal wheels at the four corners of the wooden board for mobility. Then, use wooden strips and self-tapping screws to increase the height of the tank. Cut an opening on the side of the water storage tank, install sponge strips to form a door frame, and embed a plastic soft board to create an elevated wall. Place the upper half of the water storage tank on top of the wooden strips as a roof and apply white waterproof paint to enhance its appearance. Use foam strips to拼接 (assemble) honeycomb wooden boards to make a simple door. Cut a hole at the bottom of the tank and install a drainage pipe to form a floor drain. Cut holes on the side and bottom of the plastic bucket, connect them with direct joints, place another plastic bucket over it to form a small water storage device, and connect a shower made from water pipes. Install a three-way joint below the water inlet pipe and connect a showerhead. Place the toilet and install the water tank, securing them with glass glue. Finally, connect the drainage pipe to the sewage tank, horizontally connect a water pipe to the three-way joint of the outlet pipe and extend it to the door as the water inlet pipe for the sink, and cut a hole in the door to install a joint and connect a hose.

II. Using a water storage tank and a pallet You need to prepare materials such as a plastic pallet, universal wheels, a water storage tank, an angle grinder, self-tapping screws, a toilet, water pipes, glue, a faucet, a stainless steel basin, wooden boards, hinges, and door handles. Fix universal wheels at the four corners of the bottom of the plastic pallet. Place a water storage tank retrieved from a garbage station on the pallet. Use an angle grinder to cut along the marked line on the top of the water storage tank to remove the top surface and form an open tank. Place another open-top water storage tank upside down on the first tank and fix the outer frame with self-tapping screws. Cut a rectangular opening to form a door. Subsequent steps include installing a toilet, a faucet, a sink, etc., and making a bathroom door.

III. Buying an overall aluminum alloy frame portable toilet The exterior wall of the overall aluminum alloy frame portable toilet is made of 5-centimeter-thick insulated composite panels, equipped with a swing door with a ball lock. The interior is configured with a ceramic squatting pan, a ventilation system, switches, lighting, etc. It can be used directly after connecting to water and electricity on site. The price is about 850 yuan, and it is durable for more than ten years.