Simple Mobile Toilet Bathroom

The simple mobile toilet bathroom can be made by using materials such as water storage tanks and buckets, combined with components like universal wheels and sanitary ware. Here are the specific production methods and related introductions:

Production using water storage tanks
First, prepare a used water storage tank from a garbage station. Fix universal wheels at the four corners of the bottom of a拖板 (drag plate, here assuming it's a flat board used for moving the tank), and place the water storage tank on it. Cut the tank to form a canister with an opening at the top. Stack two such canisters and secure them with self-tapping screws. Then, cut a rectangular opening on the side of the canister as the doorway. Cut a hole in the internal floor, install a drainage device, and then fix the toilet. You can also install faucets, sinks, showers, and other sanitary facilities according to your needs. Finally, make a door using wooden boards and hinges and install it. This production method is relatively simple, utilizes used water storage tanks, has a low cost, and is suitable for individual or small-scale use scenarios.

Production using water storage buckets
First, split a water storage bucket in half with an angle grinder. Fix universal wheels at the four corners of a wooden board, and use wooden strips and self-tapping screws to increase the height of the bucket. Cut an opening on the side of the bucket as the doorway, install sponge strips to form a door frame, embed plastic soft boards to form walls, place the upper half of the bucket on top as the roof, and apply waterproof paint. Assemble wooden boards to make a door and install it. Cut a hole in the bottom of the bucket, install a drainage pipe to form a floor drain, connect the interfaces properly, and place a plastic bucket as a small water storage device. Connect bath heaters, showers, toilets, and other equipment, install a water tank, connect the drainage pipe to a sewage bucket, and connect a water pipe as the inlet pipe for the sink. This production method is relatively more complex, but the functions are more complete and can meet various usage needs.

General composition and characteristics of mobile toilets
Mobile toilets are generally composed of fecal sewage storage tanks (or fecal sewage treatment devices), floor slabs, sanitary ware, walls, sanitary facilities, water tanks, roofs, and mobile devices. There are various classifications based on structural form, mobility method, and sewage treatment method. They have advantages such as being movable, combinable, and easy to transport, and are suitable for various places such as stations, docks, and tourist attractions.