Shijiazhuang Mobile House Container 1.5x2

No standardized product information for the '1.5x2 specification mobile house container' has been found in the Shijiazhuang area, but this requirement can be met through customization services. Here are the specific details:

I. Common Types and Uses of Container Mobile Houses in Shijiazhuang

Container mobile houses in the Shijiazhuang market are mainly standardized modules, with common specifications including international standard sizes such as 20 feet (approximately 6.06×2.44 meters) and 40 feet (approximately 12.19×2.44 meters). They are primarily used in scenarios such as temporary housing on construction sites, commercial stalls, and storage spaces. These products typically use galvanized steel sheets or rock wool sandwich panels as the main structure, featuring mobility and reusability. Some high-end models also integrate water and electricity systems as well as thermal insulation functions.

II. Customization Feasibility for the 1.5x2 Specification

If a non-standard size of 1.5 meters (width) × 2 meters (length) is required, it can be achieved through the following methods:

1. Modular Cutting and Reassembly
   Suppliers can perform horizontal or vertical cutting on standard containers (such as the 3×6-meter model), retain the core frame structure, and then re-weld steel plates to form an independent unit that meets the 1.5×2-meter requirement. This method requires ensuring that the structural strength after cutting complies with building safety standards (such as wind resistance rating ≥ Grade 8 and seismic fortification intensity ≥ Grade 6).

2. Light Steel Structure Customization
   A light steel frame (such as C-shaped steel or square tubes) is used to build the main structure, covered with color steel sheets or aluminum-plastic panels, and filled with glass wool or polystyrene boards inside for thermal insulation. This solution offers higher flexibility and can be designed entirely according to the 1.5×2-meter size, but additional configuration of water and electricity pipelines as well as door and window systems is required.

III. Recommended Local Suppliers and Consultation Points

1. Hebei Zhonghui Integrated Housing Co., Ltd.
   Specializes in container modification and light steel house customization, providing one-stop services from design to installation. When consulting, the following parameters need to be clarified:

   • Usage scenario (such as temporary office, storage, or living);
   • Structural requirements (whether load-bearing is required, wind resistance rating);
   • Supporting facilities (water and electricity interfaces, ventilation systems).

2. Hebei Shuojian Steel Structure Engineering Co., Ltd.
   Focuses on customization of non-standard containers, supporting personalized adjustments in size, material, and function. It is recommended to focus on communication regarding the following aspects:

   • Customization cycle (usually 15-30 working days);
   • Cost composition (material costs account for 60%-70%, labor and transportation costs account for the remaining part);
   • Compliance (whether it complies with local fire protection and building regulations).

IV. Precautions

• Structural safety: Non-standard sizes may affect overall stability, and suppliers should be required to provide structural calculation sheets and load test reports.
• Transportation restrictions: If the height of the 1.5×2-meter unit exceeds 2.5 meters, it is necessary to confirm whether the transportation route is restricted (such as height limits for bridges and tunnels).
• Cost comparison: The customization price is usually 20%-50% higher than that of standard products, and cost-effectiveness needs to be weighed according to the budget.