Shangqiu Overall Mobile Toilet Installation

The installation of overall mobile toilets in Shangqiu should follow standardized procedures, covering four major aspects: pre-installation preparations, on-site installation, post-installation maintenance, and management recommendations. Details are as follows:

I. Pre-installation Preparations

1. Site Survey and Location Selection: Avoid low-lying areas prone to water accumulation, areas beneath high-voltage power lines, and busy pedestrian thoroughfares to ensure smooth vehicle access for operations. The selected location should be within 30 meters of the activity area or construction site, close to water sources and drainage systems. The ground must be hardened and level, with a load-bearing capacity of ≥2 tons/㎡. For soft soil, a gravel bed or concrete foundation should be laid.
2. Equipment and Tool Inspection: After receiving the leased equipment, inspect the main structure of the mobile toilet and accessories (such as door hinges, drainage valves, and lighting systems) for integrity and confirm that the quantities and models are correct. Prepare tools such as wrenches, screwdrivers, and spirit levels, and equip safety signs such as warning cones and reflective tapes.
3. Policy Compliance: Report to the local urban management department in advance to ensure that the installation location complies with the 'Standards for the Installation of Urban Environmental Sanitation Facilities'.

II. On-site Installation Steps

1. Main Body Positioning: Use a forklift or crane to lift the mobile toilet smoothly to the designated location. Use a spirit level to calibrate the horizontal alignment of the toilet body, reserving at least 0.5 meters of surrounding activity space.
2. Drainage and Utility Connections: Connect the toilet's drainage pipe to the nearest drainage outlet or temporary collection bucket to ensure smooth drainage. If an external power supply is required, it should be operated by a professional electrician, installing waterproof sockets and ensuring proper grounding. Also, check the battery level of the lighting system or external wiring.
3. Equipment Assembly and Debugging: The professional team should complete the assembly of the single toilet within 2 hours, debugging the water, electricity, and ventilation systems to ensure normal flushing, lighting, and sewage discharge functions.

III. Post-installation Considerations

1. Safety Signs and Detail Inspection: Set up 'Mobile Toilet' signs within a 5-meter radius of the toilet and install warning lights at night. Test the flushing function, door lock operation, and ventilation system, clean the interior, and place usage instructions.
2. Daily Maintenance: During the rental period, check the equipment status daily, promptly clean up garbage, replenish toilet paper and hand soap, and arrange for dedicated inspections during peak usage periods.

IV. Other Standards and Management Recommendations

1. Functional Zoning and Facility Configuration: It is recommended to have a male-to-female toilet ratio of 1:1.5. For accessible toilets, reserve a passage width of ≥1.5 meters and equip them with hooks, storage shelves, and emergency call buttons.
2. Environmental Protection and Safety Protection: Choose water-flush or packaged toilets; the use of direct-discharge equipment is prohibited. Install anti-slip pedals, handrails, and lightning protection devices. Provide sunshades in summer and take anti-freezing measures in winter.