How to Flush Mobile Toilets in Shangqiu

The flushing methods for mobile toilets in Shangqiu mainly include high-pressure air-water flushing, foam flushing, water flushing, and waterless suction flushing, with differences in flushing principles and operations for each method.

High-pressure air-water flushing: This flushing method utilizes high-pressure water flow and gas to flush the inner walls of the toilet bowl. Its advantages lie in its high flushing pressure and wide range, requiring only one-fifth of the water used in conventional flushing to clean the toilet bowl thoroughly, significantly conserving water resources. In terms of flushing control, it is achieved through the collaboration of an infrared sensor and a computerized intelligent system. When the user finishes using the toilet, the infrared sensor detects this and sends a signal to the computerized intelligent system, which then controls the high-pressure air-water flushing device to start, providing precise and effective flushing to ensure the toilet bowl remains clean at all times.

Foam flushing: An automatic foam generator is installed in the equipment room, capable of producing a large amount of foam that covers the toilet bowl with a layer of snow-white foam. This process uses foam generated by a mixed liquid to replace conventional flushing methods. The foam not only cleans the toilet bowl but also effectively blocks odor emission, making the interior environment of the mobile toilet more fresh and pleasant, while further conserving water resources.

Water flushing: Equipped with a water flushing device, the water tank is generally placed on top of the toilet. When flushing is needed, water from the tank flows through specific pipes into the toilet to flush away waste. The bottom of the toilet is equipped with a sewage tank to collect the flushed wastewater. However, the sewage tank capacity of this type of mobile toilet is relatively small, and when the number of users reaches a specified limit, timely sewage pumping is required to ensure normal operation.

Waterless suction flushing: This type of toilet has no flushing device, and the sewage pool at the bottom of the toilet directly receives the user's waste. Similarly, due to the limited capacity of the sewage pool, timely sewage pumping operations are also required when the number of users reaches a certain level to prevent the sewage pool from overflowing and affecting the normal use and environmental hygiene of the mobile toilet.