Sanitation Group Mobile Toilet
The Sanitation Group Mobile Toilet is a mobile device in modern public sanitation facilities with modular design, efficient resource management, and flexible deployment capabilities. Its core features are as follows:
1. Modular and Integrated Design
It adopts a split-box structure, independently prefabricating functional units such as compartments, sewage systems, and water supply modules. The wall materials are high-density polyethylene or fiberglass-reinforced plastic, offering both corrosion resistance and lightweight properties. The factory prefabrication rate exceeds 85%, with only quick pipeline connections and foundation fixing required on-site. Through wall-mounted sinks, folding handrails, and sloped floor designs, the area of a single toilet compartment can be compressed to less than 1.2 square meters while meeting the turning space requirements for wheelchairs. The number of modules can be dynamically adjusted according to foot traffic, such as using a combination of '1 management unit + 10 toilet units' for large events, which can be quickly dismantled and relocated after the event.
2. Efficient Energy and Water Resource Management
The power supply system utilizes solar photovoltaic panels in conjunction with batteries. A single standard panel generates approximately 0.5 kilowatt-hours of electricity per day, meeting the needs of lighting, exhaust fans, and infrared-sensing flush valves. Water resource management relies on a dual-cycle system: gray water from sinks is simply filtered and used for floor cleaning, while toilet water is treated with biodegradable agents to reduce odors and lower the frequency of water changes; some models are equipped with rainwater collection devices, which are disinfected with ultraviolet light and used as backup water sources.
3. Environmentally Friendly Waste Treatment Technologies
Two solutions are provided: vacuum collection and microbial degradation. The vacuum collection method uses negative pressure pipelines to suck waste into sealed tanks, requiring only 0.5 liters of water per flush and achieving a water-saving rate of over 90%; the microbial degradation method decomposes organic matter into solid fertilizer and carbon dioxide through pre-buried fillers containing specific bacteria and an aeration system, eliminating the need for regular pumping. Both solutions comply with the emission standards of the 'Urban Environmental Sanitation Facilities Planning Code'.
4. Low Maintenance Costs and Emergency Response Capabilities
Quick-release hardware and standardized components enable single-part replacement within 20 minutes. In the event of a regional water supply failure, the built-in water tank mode can be switched to, with automatic water refilling achieved through water level sensors and pump valve linkage. Operation and maintenance personnel can monitor equipment status in real-time through a remote monitoring system, ensuring stable operation at large events or temporary settlement sites.
5. Leasing Services and Scenario Adaptability
The service covers the entire process from demand assessment, site planning, transportation and installation, to maintenance and recycling, supporting environmentally adaptive designs such as water-saving models, specialized models for cold regions, and custom models for large events. As a form of public service outsourcing, the leasing model reduces the initial investment pressure on users while ensuring sanitation standards and equipment integrity through professional maintenance, thereby reducing environmental pollution and resource waste.
