Rural Invention of Movable Toilet

The movable toilets invented by individuals in rural areas are mainly achieved by using materials such as water storage tanks and buckets combined with simple structures. There are also professional mobile environmental-protection public toilets available on the market.

Rural Individual Invention Cases

• Combination of Water Storage Tank and Pallet: Use tools to fix universal wheels at each of the four corners at the bottom of the pallet, and then combine the water storage tank with the pallet to form a movable toilet. This method has a simple structure, uses existing materials, and has a relatively low cost. It is suitable for quick construction by individuals in rural environments, can meet basic toilet needs, and is easy to move, allowing for position adjustments according to actual requirements.
• Water Storage Bucket Modification: Take out the water storage bucket at home and split it in half with an angle grinder. Fix universal wheels at the four corners of a wooden board for easy movement, and use wooden strips and self-tapping screws to fix them on the upper side of the bucket to increase the height. Open a door on the side of the water storage bucket, install sponge strips to form a door frame, and embed plastic soft boards to create an elevated wall. Place the upper half on the top of the wooden strips as a roof and paint it with white waterproof paint. Use foam strips to拼接 (assemble) discarded honeycomb wooden boards to make a simple door. Open a hole at the bottom of the bucket and install a drain pipe to form a floor drain. Open holes on the side and bottom of the plastic bucket and install direct connectors. Place the plastic bucket on the roof as a small water storage device, connect a water pipe-made bath heater, install a three-way connector below the water inlet pipe and connect a showerhead, place a toilet and install the water tank properly, fix it with glass glue, connect the drain pipe to the sewage bucket, and horizontally connect a water pipe from the three-way connector of the outlet pipe to the door as the water inlet pipe for the washbasin, etc. This modification method is relatively complex but has relatively complete functions, enabling multiple functions such as toilet use and bathing.

Mobile Environmental-Protection Public Toilets on the Market

These are public sanitation facilities designed based on new materials and water-saving technologies. The frame is welded with national standard steel, and the surface is covered with anti-corrosion and fire-resistant materials such as color-coated steel plates or carved panels, with a service life of more than 20 years. It is equipped with an independent toilet pit partition treatment system inside and complies with the GBLT18091-92 standard. Since 2012, it has gradually developed into multiple technical routes and sub-categories, with applications covering public places such as scenic spots, service areas, and rural areas, better meeting the sanitation needs of rural public places.