How to Flush Mobile Toilets in Quanzhou
The flushing methods for mobile toilets in Quanzhou mainly include high-pressure air-water flushing, foam flushing, foot-pedal flushing, and manual button or handle-pull flushing.
High-pressure air-water flushing: This method utilizes the combined action of high-pressure water flow and gas to flush the inner walls of the toilet bowl. Its advantages lie in its high flushing pressure and wide flushing range, requiring only one-fifth of the ordinary water volume to thoroughly clean the toilet bowl, significantly saving water resources. In terms of operation, the flushing control is jointly accomplished by an infrared sensor and a computerized intelligent system. When the user finishes using the toilet, the infrared sensor detects the departure of the human body and transmits the signal to the computerized intelligent system, which then controls the high-pressure air-water device to start flushing. The entire process is highly automated and very convenient to use.
Foam flushing: An automatic foaming machine is installed in the equipment room, capable of producing a large amount of foam that covers the surface of the toilet bowl with a layer of snow-white foam. The uniqueness of this process lies in using the foam generated by the mixed liquid to replace the conventional flushing method. The foam not only cleans the toilet bowl but also effectively blocks the emission of odors, keeping the air inside the toilet fresh. At the same time, compared to traditional flushing methods, foam flushing significantly saves water resources, aligning with environmental protection concepts.
Foot-pedal flushing: Some mobile简易 (simplified) toilets are equipped with a foot-pedal device. When the user finishes using the toilet, they simply need to step on the black foot-pedal ball, and the squat toilet will automatically flush. This flushing method is simple and direct, eliminating the need for the user to touch the flushing equipment with their hands, making it more hygienic and especially suitable for scenarios with high hygiene requirements or where users are inconvenient to operate with their hands.
Manual button or handle-pull flushing: This is a relatively common flushing method. A water tank is installed inside the toilet, connected to the flushing pipeline. After the user finishes using the toilet, they press the flushing button or pull the handle, and the water in the water tank quickly flows through the pipeline to the toilet bowl, completing the flushing action. This method is simple and easy to understand, easy to operate, and widely used in various types of mobile toilets.
